|
|
Joined: Feb 2004
Posts: 1
Member
|
OP
Member
Joined: Feb 2004
Posts: 1 |
I believe I have 5x20 Key sets only on my 1432b system and need programming overlays.
The overlays I have fit a key set with a 22 btn. field above the dial pad. Can this be shifted to match my 20 btn. field or can you map out the programming keys of my key set.
|
|
|
|
|
Joined: May 2003
Posts: 2,267
Member
|
|
Member
Joined: May 2003
Posts: 2,267 |
What are the model numbers of the phones you have? It should be a 4 digit number followed by a letter, followed by a 2 letter color code, i.e. 6620S-PG.
[This message has been edited by paul144 (edited February 18, 2004).]
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Depends on what phone you are programming with as to what keys you use.Your going to need a Console also.
[This message has been edited by dtmf (edited February 18, 2004).]
|
|
|
|
|
Joined: May 2003
Posts: 2,267
Member
|
|
Member
Joined: May 2003
Posts: 2,267 |
Stupid me! I forgot that you need a dss to program those. OOPS!
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
I don't remember if the old 1432B had VDT ability, I tend to think it didn't, but I could be wrong. I need to upgrade my memory chips.
mark
|
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
serial port built in the amp connector, you just punch down to it. Use VDT, Laptop or modem.
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
yes, you use the SMDR port on J4 pair 39 thru 46
|
|
|
|
Forums84
Topics93,877
Posts636,987
Members49,670
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
32
guests, and
20
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg)
