Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
executech 616
#37405 08/23/07 03:49 PM
Joined: Aug 2007
Posts: 2
Member
OP Offline
Member
Joined: Aug 2007
Posts: 2
Hello,
Does anyone know how to program the A1-A12 buttons for intercom and co lines?
First time with a Comdial and seem to be missing the info in the manual.
Matt

Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
Re: executech 616
#37406 08/23/07 04:07 PM
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
*****
Offline
Moderator-Comdial
*****
Joined: Jan 2002
Posts: 2,328
If you mean DSS button, try Intercom**3 press the button to program and dial the extension number. Programming lines to the A field is a bit more complicated and you should only program lines to buttons with lights. If you acquire the necessary "pages" for programming, I offer this tip. After you enter the correct program code and extension, you should blank all buttons. There are do's and don'ts with executech. This is installer level programming and we are prohibited from providing that level of assistance in the open forum.

Re: executech 616
#37407 08/23/07 04:28 PM
Joined: Aug 2007
Posts: 2
Member
OP Offline
Member
Joined: Aug 2007
Posts: 2
I downloaded the manual and it's beginning to look a little greek to me after a couple hours of thumbing through it.
I did the **3 tip and all that happens is A1 is lit up automatically when I hit intercom. Therefore not letting me program the other A buttons. I'm using a 6714x phone.

Re: executech 616
#37408 08/23/07 11:20 PM
Joined: Jul 2006
Posts: 2,536
Moderator-Panasonic
***
Online Content
Moderator-Panasonic
***
Joined: Jul 2006
Posts: 2,536
I'd check to make sure the XE manual revision you downloaded is the same as the revision on the KSU. In the Rev B or later manual, the programming instructions are pretty specific.

If the box is new, you can default the system. If not, you have codes you can dial from system programming to map buttions to the A field if that's what you're trying to do.

Carl


There's no place like 127.0.0.1
Re: executech 616
#37409 08/24/07 04:17 PM
Joined: Mar 2006
Posts: 328
Member
Offline
Member
Joined: Mar 2006
Posts: 328
If your DSS button lights up when you hit intercom, you probably programmed the DSS button for your 'own' extension...ie the button calls your own extension. So it will light when your station is not idle. Lifting the handset and then pressing your 'own' DSS button results in an all-call page. Pressing it when idle just seizes the intercom. Of course, DSS buttons are most useful when programmed to intercom other stations...

The Class Of Service section of the manual looks a little greek because it is intended to supplement a certified Comdial tech in servicing the system. The system is old, but there are numerous techs like jwooten, Carl, myself, and pretty much all the other mods on this board who can help you program for a modest fee. Use the PM feature to contact a tech for assistance.


Hackbarth Communications, L.L.C. - Serving South Central Wisconsin's Telecom Needs
Re: executech 616
#37410 08/24/07 05:58 PM
Joined: Jul 2006
Posts: 2,536
Moderator-Panasonic
***
Online Content
Moderator-Panasonic
***
Joined: Jul 2006
Posts: 2,536
My favorite Comdial memory was the "buy one, get one free" KSU deal. Never mind that the "Made in America" phones were pretty expensive. I think we sold them for $200 plus in 1980's money!
It kinda gave us the $1000 plus $200 bucks a phone quick quote bidding system.

I still have 8-10 KSU's on the warehouse shelf and I try to pitch the yellowed ash phones as I can.

Of those old systems, Impacts were the best.

Carl


There's no place like 127.0.0.1

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
Vodavi Starplus DHS Unusual Events
by ABLE1 - 09/30/20 01:56 PM
WebRTC
by Coral Tech - 09/30/20 01:50 PM
SV9100 CP10
by teldata1 - 09/30/20 12:31 PM
SV9100 Software
by teldata1 - 09/30/20 11:41 AM
7100 Lan Printer Error
by RM SYSTEMS - 09/28/20 02:27 PM
Who's Online Now
31 members (jsaad, hbiss, justbill, Carl Navarro, JBean3329, RATHER BE FISHING, Ruben, crazy canuck, Daniel, Touch Tone Tommy, Yoda, Bob3470, Memphisribs, jknichols, Professor Shadow, LenShustek, KRRath, Iwatsu Guru, STS E, gelehu, Noobed2336, ChrisNI, ABLE1, erniejoey, vicbob, BobRobert, metelcom, MooreTel, Hofman telekom, RonP, phonman123), 578 guests, and 77 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,979
Posts637,384
Members49,357
Most Online5,661
May 23rd, 2018
Today's Birthdays
data-monkey, LightSRC, MW2012, Rob Caves, Sonny NJ, The Tech
Newest Members
Hanale, xware, Adam19871, tmr-afmk, Big Alan
49356 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 29
hbiss 12
ABLE1 12
Ruben 11
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Sold AD
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners