web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Dec 2009
Posts: 11
SirTom Offline OP
Member
OP Offline
Member
Joined: Dec 2009
Posts: 11
I am trying to get a Comdial Impact DSU to work with Keyvoice voicemail. The Voicemail is working fine and the Dialogic Card test runs fine. The DSU has ext 38 -41 set to ATI Device. If run the Dialogic PBXpert the wizard fails on the “Auto Line” test under “Dialing” and if I skip that test the DSU Tones fails too. I’m not sure if I have a programming problem or if the Lines coming out of the DSU are bad. Is there a way to check if the lines on the DSU are okay? Any advice would greatly appreciated.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Nov 2006
Posts: 187
Member
Offline
Member
Joined: Nov 2006
Posts: 187
Is the Keyvoice analog or digital? ATI-D convert digital to analog...Also you have to set up a pilot number in the KSU if it's a DSU I. Otherwise there is a little bit of programming involved along with the first time set up for the Vmail...


A. S. Tech Communication, Inc.
559-628-0901
Al Rivas CEO
Joined: Dec 2009
Posts: 11
SirTom Offline OP
Member
OP Offline
Member
Joined: Dec 2009
Posts: 11
Analog
The Voice Mail card is a Dialogic D/41h
They had a Keyvoice that died and I put in a spare that we had.

Joined: Jun 2004
Posts: 4,552
Moderator-Comdial, ESI, Voicemail, Cisco
Offline
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552
Was the other voicemail also analog? Is the D/41H connected to ATI-D modules or a JM008 module? You'll need to run First Time Setup on the voicemail, not PBXpert.

Justin

Joined: Dec 2009
Posts: 11
SirTom Offline OP
Member
OP Offline
Member
Joined: Dec 2009
Posts: 11
Yes, the other was a analog too. I did run the First Time Setup on the voicemail and reboot the pc before running the PBXpert. I think it was connected to ATI-D modules (verify that with the site now).

Joined: Jun 2004
Posts: 4,552
Moderator-Comdial, ESI, Voicemail, Cisco
Offline
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552
If you put a butt set on the ports from the DSU, you should get a "splash tone" (DTMF digit 9, I believe). If not, the ports need to be reconfigured as voicemail ports.

Justin

Joined: Dec 2009
Posts: 11
SirTom Offline OP
Member
OP Offline
Member
Joined: Dec 2009
Posts: 11
Can anyone tell me if a RTI-D is the same as a ATI-D or what a RTI-D is?
The site has 3 RTI-D.
I think they use to have an old Dos KeyVoice Voice Mail system.
The DSU has ext's connected to these RTI-D's and then run to where the Voice Mail system is.

Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
*****
Offline
Moderator-Comdial
*****
Joined: Jan 2002
Posts: 2,328
It may look like an "R" but it's an "A". Each device supports 2 ports and the ports must be paired. You previously stated 38-41 are connected so your OK there. You can connect a LT to 232a port and look at the programming with hyperterm.

Joined: Dec 2009
Posts: 11
SirTom Offline OP
Member
OP Offline
Member
Joined: Dec 2009
Posts: 11
Had to visit the site to fix the problem. Ending up being a wiring issue.
The Tech they had call in ran wires from the ext to both side of the ATI-D and the Voice Mail. So, when the phone system call a Voice Ext it was trying to dial the voice-mail and both side of the ATI-D all at the same time? Not sure where got his wiring diagram?

Oh well, that what make life interesting.

That for all your suggestions. This has be a great forum for solving problems.


Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5