|
|
Joined: Jan 2005
Posts: 19
Member
|
OP
Member
Joined: Jan 2005
Posts: 19 |
Hi - I have a Samsung DCS with a Cadence VM8A voicemail board. In MMC 601 group 529 is assigned to Cadence with member 1 being port 249, 2-250 and so on. It's a 4 port module. When I enter extension 249 it works fine, goes to the cadence. 250 is ok 251 is ok. When I enter 252 it says FWD - 231 - Ringing and rings at that extension. I tried power down/up the whole system, no luck. How can I access this port to take the fowarding off? Its not something I can just use a butset to edit. Any help would be greatly appreciated. Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,307 Likes: 6
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,307 Likes: 6 |
You would have to enter mmc 102 and turn off call forwarding for that extension number.
|
|
|
|
|
Joined: Jan 2005
Posts: 19
Member
|
|
OP
Member
Joined: Jan 2005
Posts: 19 |
THANK YOU!!! It worked! When I tried to go into mmc102 it only allowed me to change the settings for the station I was currently on. When I entered admin mode and tried, it allowed me to change the extension number. Thanks again so much. -- Peter
|
|
|
|
Forums84
Topics93,970
Posts637,433
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (tech3500, Bob3470),
45
guests, and
34
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
