Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
DCS-816 - PROGRAMMING LINE 1 BUTTON
#426649 07/11/06 02:50 AM
Joined: Jun 2006
Posts: 14
da3533 Offline OP
Member
OP Offline
Member
Joined: Jun 2006
Posts: 14
HEY,

i have a 12 btn keyset and i want to be able to program the 3rd button from the top for the incomming line 1 and the 4th for line 2.

how do i do this?

thanks

Samsung Telephones and Equipment
Re: DCS-816 - PROGRAMMING LINE 1 BUTTON
#426650 07/11/06 06:53 AM
Joined: Dec 2004
Posts: 4,096
Member
*
Offline
Member
*
Joined: Dec 2004
Posts: 4,096
I dont understand 3rd button from the top?

button map

1 2 3 4 5 6
7 8 9 10 11 12

dail mmc 722 then station number then press the button you want then dt701 hear confirm tone then press next button then dt702

Re: DCS-816 - PROGRAMMING LINE 1 BUTTON
#426651 07/11/06 07:11 AM
Joined: Sep 2001
Posts: 2,196
pvj Offline
Moderator-Executone-Isoetec, Samsung
*****
Offline
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,196
He's using the European keysets.
da3533 do you have access to the technician level programming and passcode?Without it you cannot do what you are asking.

Re: DCS-816 - PROGRAMMING LINE 1 BUTTON
#426652 07/12/06 03:35 AM
Joined: Jun 2006
Posts: 14
da3533 Offline OP
Member
OP Offline
Member
Joined: Jun 2006
Posts: 14
hey,

yes i have entered 722, but what do you mean by dt701?

Re: DCS-816 - PROGRAMMING LINE 1 BUTTON
#426653 07/12/06 05:32 AM
Joined: Mar 2001
Posts: 3,869
Member
****
Offline
Member
****
Joined: Mar 2001
Posts: 3,869
If you can get into technician level programming, you go to MMC 722. Then you dial in the extension number of the phone you want to program, then push the button you want to be line one.

Then press the "3" button on the keypad and use the volume up key until it says "DT" and then press the right of the 3 buttons under the display (do not count the Scroll button) and dial 701 on the keypad.

Push the button you want to be line two and press the "3" button on the keypad and use the volume up key until it says "DT" and then press the right of the 3 buttons under the display (do not count the Scroll button) and dial 702 on the keypad.

You are done, press the [Transfer] key.

DT stands for Dial Tone and 701 is line one, 702 is line two, 703 is line 3, well you get the picture.

Program 723 programms all phones of the same type, program 722 programs just one phone at a time.


THE Bracha, old blond specialist in Rube Goldberg solutions.

Moderated by  Genesiscomm, nameless, pvj 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
Kari's Law and Basic Edition
by ffej010 - 07/04/20 07:10 PM
IP Office 500 vers. 9.0
by Telesystems - 07/03/20 05:27 PM
Merlin Legebd
by hitechcomm - 07/03/20 08:35 AM
SIP phone Interoperability
by Bushmills - 07/02/20 11:48 PM
Who's Online Now
17 members (Curlycord, BobRobert, OBT, nortelvoip, dexman, Mercenary Roadie, EV607797, newtecky, Bob3470, Bob-o, hbiss, Yoda, justbill, RATHER BE FISHING, usedphones, Carl Navarro, davetel), 112 guests, and 52 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,796
Posts636,277
Members49,308
Most Online5,661
May 23rd, 2018
Today's Birthdays
robert baker, Vangar
Newest Members
Real Estating, ForestHillChurch, Rick95, Byron Stewart, chad1003
49307 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 24
dans 10
Ruben 9
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners