|
|
Joined: Apr 2007
Posts: 610 Likes: 1
Member
|
OP
Member
Joined: Apr 2007
Posts: 610 Likes: 1 |
I have a customer w/100 system that every month or so will lock up. Phones show ver# on displays and have to shut system off and on to reset. I have replaced the whole system except vmail card and still happens! Customer has phones in garage across street with underground cable feed. Garage has heavy equipent, welding etc. Customer says seems to happen when call rings into system. Anybody seen this before?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
Do you have a UPS installed?May be a power problem.
|
|
|
|
Joined: Apr 2007
Posts: 610 Likes: 1
Member
|
OP
Member
Joined: Apr 2007
Posts: 610 Likes: 1 |
Have a UPS and had the electrician install dedicated circuit. Thanks.
|
|
|
|
Joined: May 2004
Posts: 756 Likes: 2
Member
|
Member
Joined: May 2004
Posts: 756 Likes: 2 |
What about the VM card? That's the only thing left.
|
|
|
|
Joined: Apr 2005
Posts: 110
Member
|
Member
Joined: Apr 2005
Posts: 110 |
I have had that issue before. Turned out to be a vm card that died and screwed up the DB, keeps the processor looking for the card.
|
|
|
|
Joined: Apr 2005
Posts: 52
Member
|
Member
Joined: Apr 2005
Posts: 52 |
If it is not the VoiceMail card. Keep looking at the power being the source. The electrician setup an dedicated circuit,did it include an dedicated ground? I did have a customer that also used arc welders. I mention that may cause a problem and it did. I had to prove it to him. It so happen he got the place next door. I ran an extension cord to an outlet next door. He stop calling about the problem (separated power panels). Surges can travel down any one of electrical wires even ground. Best of Luck!
FTorres388 Calm seas do not make skilled sailors.
|
|
|
|
Joined: Apr 2007
Posts: 610 Likes: 1
Member
|
OP
Member
Joined: Apr 2007
Posts: 610 Likes: 1 |
The welding is done in a seperate building across street so there is no interference through electrical. Maybe interference through 25 pair feed? As far as vmail card goes, it never died and is running fine. Maybe I should replace anyway? Another point: When system had mem3 card and locked up, a reset would default programming. Since replacing w/SMCP card system locks up but doesn't default when reset.
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
1 members (nortelvoip),
130
guests, and
351
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|