 Networked 7200's | Joined: Sep 2007 Posts: 3 Member | OP  Member Joined: Sep 2007 Posts: 3 | Customer has 2 7200's networked via VPN tunnel. All is well except you do not see the last digit of the extension number that is calling you from the remote side. Eg X-148 calls you, you see 14 on your display. Timing maybe? | | | Re: Networked 7200's | Joined: Oct 2006 Posts: 140 Member | | Member Joined: Oct 2006 Posts: 140 | Probably number of digits in NLCR translation on the transitting side, but I dont see the call making it to the destination if that was the case. | | | Re: Networked 7200's | Joined: Oct 2006 Posts: 140 Member | | Member Joined: Oct 2006 Posts: 140 | Or, delete count in DID translation table on receiving side. | | | Re: Networked 7200's | Joined: Sep 2005 Posts: 690 Member | | Member Joined: Sep 2005 Posts: 690 | So the calls DO go through to the right extension? But the display is wrong? | | | Re: Networked 7200's | Joined: Sep 2007 Posts: 3 Member | | OP Member Joined: Sep 2007 Posts: 3 | Delete count is 0
Yes the calls go through every time to the right ext just only shows the first 2. I'm thinking matbe its a caller id timer thing seeing as it is essentially a co call. | | | |
21 members (Tip&Ring, EV607797, LenShustek, Touch Tone Tommy, nortelvoip, Professor Shadow, BobRobert, hbiss, C5Z, hitechcomm, newtecky, Meyery2k, Hofman telekom, Bob3470, metelcom, Yoda, justbill, teldata1, Ruben, JBean3329, phonman123),
154
guests, and
43
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums94 Topics93,952 Posts637,230 Members49,346 | | Most Online5,661
May 23rd, 2018 | | |
|
