atcomsystems.ca/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems OS7200 with PRI

Due to the dynamic structure of the board, we are making a few changes. The posts that are being moved from the installer’s section to the open forum have been deemed viewable for the public. There are a few caveats to these moves that also pertain to any future topics that you may decide to help with.
1. When posting a possible answer we request that you state facts not opinions.
2. When posting do not include any proprietary information.
3. When posting use this theory; provide information on what to do and not how to do it.

An example would be; in order for you to use the return call feature from the caller ID display. You need to use the least cost routing feature.

A bad example would be; in order for you to use the return call feature from the caller ID display. Go to mmc XXX and insert the digits needed. Then go to mmc XXX and XXX to activate LCR.

We still encourage the use of the PM feature or email if you plan on providing technical information that is above the user guide or admin programming ability. For the installer that has a technical question you can still use the installer’s category with out fear of your post being moved.

If you feel that a topic should not be in the open forum please make your request known to a moderator for that category. Include a link to the thread and your reasons for the request.

Thank you for your understanding in this matter.

i have the same problem w/7200 tepria card, and
nuvox. mine is plugged into strait to the smart
jack with 15 channels,and it does the same thing you have to call in on the channel to open it up
for outgoing.