web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
#433255 12/03/04 05:35 PM
Joined: Dec 2004
Posts: 4
bmusee Offline OP
Member
OP Offline
Member
Joined: Dec 2004
Posts: 4
We just bought this unit for our office and have installed it with 8 4 lines coming in and 7 extensions. I have read the posts to see how to make the phones ring..I followed the instructions below ..but what seems to happen is that the only phone to ring is the first one that I put in after the #62--if that phone isn't there it rings to the second one that I had input..?? anyway to make them all ring?


1 STATION SHOULD RING IN DEFAULT
FOR OTHERS YOU HAVE TO TURN ON PROGRAMMING IN #20 ON DISPLAY SET
1-#20
2- x-x-x-x-1
3- # KEY THAT OPENS PROGRAMING
THEN #62 -DIS PLAY SAYS DAY RING AASN
4-PRESS CO LINE THAT YOU WANT TO RING
5- PRESS DSS BUTTONS AND LIGHT BUTTON OF PHONES YOU WANT TO RING Dss buttons are the 16 buttons on the left side of the set and each one represents one of
your telephones

6- PRESS #
7 #62 THEN NEXT CO AND REPEAT FOR ALL LINES
USUALLY UP TO 8 PHONES CAN RING \
B4 YOU DO ANY PROGRAMMING MAKE SURE BATTERY JUMPER/SWITCH IS ON ON MOTHER BOARD /LOWER RIGHT

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#433256 12/03/04 05:47 PM
Joined: Dec 2004
Posts: 4
bmusee Offline OP
Member
OP Offline
Member
Joined: Dec 2004
Posts: 4
Was I supposed to push the intercom buttons as opposed to putting in the numbers?

#433257 12/04/04 01:52 AM
Joined: Apr 2004
Posts: 4,991
Member
*****
Offline
Member
*****
Joined: Apr 2004
Posts: 4,991
go to #60 line ring mode
press 2 for unconditional ring
#out
that should solve it
as long as ringing instructions aboveare correct

#433258 12/15/04 09:53 AM
Joined: Dec 2004
Posts: 3
Member
Offline
Member
Joined: Dec 2004
Posts: 3
I am having the same problem getting my Prostar 816 extension to ring. I am new to this phone system and cannot figure out how to make my phone ring. Help me!

#433259 12/12/05 03:22 PM
Joined: Apr 2004
Posts: 4,991
Member
*****
Offline
Member
*****
Joined: Apr 2004
Posts: 4,991
BUMP

#433260 01/16/06 02:56 PM
Joined: Jan 2006
Posts: 1
Member
Offline
Member
Joined: Jan 2006
Posts: 1
HELP!!!!

Purchased a used ProStar 816 system w/ONE[1] 816 set & FIVE[5] 800 sets.

Have TWO[2] lines and will use all SIX[6] phones.

PROBLEM ...

I followed procedure listed above BUT ...

1-#20
2- x-x-x-x-1 AT THIS STEP x-x-x = ERROR

The # = key does open programming
The #20 = MMC Disabled

But I cannot get past the "3" in the x-x-x-x-1 ...

When I try #21 it asks for old password???

PROBLEM: Presently it rings only on the display set.

Thanks in advance and have a nice day.

LC

please try not to use passwords here. you can pm anyone you like and use them there thanks.

#433261 01/16/06 07:28 PM
Joined: Mar 2001
Posts: 3,869
Member
****
Offline
Member
****
Joined: Mar 2001
Posts: 3,869
Someone probably put in a different password.

To get it back to default, UNPLUG the 816 from the wall,(there is 110v AC in there) take the cover off, look for the battery on/off controler which could be a small sliding switch or a jumper connecting two pins of center and on or center an off. DO NOT mess with the Earth/Ground switch, this will not help anything, just leave it alone.

A small sign says BATT about two inches up above the power supply and about two inches from the right side.

Flip the switch to off or take the jumper off. Wait 30 seconds. Flip the switch on or put the jumper on the center and ON. Plug the 816 back in.

The system is in default and the #20xxxx1# will put you into programming and return the display to date and time. #20xxxx# will set the clock for AM/PM format.

This is very old manufacture discontinued stuff. Usually the batteries will not hold programming for very long. You can hook up two 12 volt 7 amp batteries to the socket or solder in a new 3.6 Ni-Mh battery to the motherboard.


THE Bracha, old blond specialist in Rube Goldberg solutions.
#433262 01/17/06 09:56 PM
Joined: Mar 2001
Posts: 3,869
Member
****
Offline
Member
****
Joined: Mar 2001
Posts: 3,869
oh writchey, this is manufacture discontinued and 15 years old. Do we really care about sequential passwords starting at 1 any longer?

Isn't there some expiration date on passwords for discontinued product?

Its not like giving them the super secret password that lets you make free international calls from the backdoor of a Toshiba PONU card.

Whatever.


THE Bracha, old blond specialist in Rube Goldberg solutions.
#433263 01/18/06 02:36 AM
Joined: Dec 2004
Posts: 4,096
Member
*
Offline
Member
*
Joined: Dec 2004
Posts: 4,096
Pm sent

#433264 01/18/06 07:23 PM
Joined: Mar 2001
Posts: 3,869
Member
****
Offline
Member
****
Joined: Mar 2001
Posts: 3,869
Lecture received. Thank you.


THE Bracha, old blond specialist in Rube Goldberg solutions.
Page 1 of 3 1 2 3

Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,703 CTX100 install
186,792 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
1 members (Curlycord), 103 guests, and 246 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5