Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
SMVi 4 in a iDCS 100
#440324 09/19/11 09:42 PM
Joined: Sep 2011
Posts: 48
Member
OP Offline
Member
Joined: Sep 2011
Posts: 48
I have searched for alarm code MNF 33, Slot 3 where the voice mail is installed in that slot. Getting the red light on the right of the center group of lights on the VM card. Did a pre install of the card and that did not turn the light out. It may be the VM system need to be cleared of its old data and start from scratch. The system has been setting around for a while and I did reinitialize the system. Guess I will have to dig up a manual for the VM, most systems I have worked on will take off with the old data on them?

Thanks

Emmett

Samsung Telephones and Equipment
Re: SMVi 4 in a iDCS 100
#440325 09/20/11 02:58 AM
Joined: Jun 2005
Posts: 574
Member
Offline
Member
Joined: Jun 2005
Posts: 574
i always throught red light should be on is it hdd what flashes green when voicemail was accessed or run which should be green any other condition indicates a fault .also looked in my books about faults cant find mnf 33 but can find mnf03 sure its not that ipc error
inter-procosser cummunication error has occuried
alarm data cab slot cx-syy

Re: SMVi 4 in a iDCS 100
#440326 09/20/11 05:19 PM
Joined: Sep 2011
Posts: 48
Member
OP Offline
Member
Joined: Sep 2011
Posts: 48
I checked the alarm number in programing and it is MNF 33, slot3. I could not find it listed in the manual that is why I put it up on the board. Now I have stopped getting the alarm warning tone

Thanks

Emmett

Re: SMVi 4 in a iDCS 100
#440327 09/21/11 10:01 PM
Joined: Sep 2011
Posts: 48
Member
OP Offline
Member
Joined: Sep 2011
Posts: 48
I found a good little start up guide and found the restart MMC740 and we will see if that clears the alarm. I am also having trouble with getting the serial port to talk to the lap top and that may just be the configuration of Hyper Terminal. The other option is that there is no programing through the serial port.

Thanks

Emmett


Moderated by  Genesiscomm, nameless, pvj 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
NS1000 UM GREETINGS
by ronaldjamesh - 05/26/20 08:49 PM
SV9100 Blue
by conxtel - 05/26/20 03:35 PM
No UM audio
by ILE - 05/26/20 02:14 PM
KXTD816 ringing wrong extension
by ToshiGal75 - 05/25/20 06:02 PM
SV9100 with 10 digit DIDs on SIP
by conxtel - 05/22/20 08:58 PM
Who's Online Now
43 members (nortelvoip, Silversam, justbill, BobRobert, Yoda, Professor Shadow, hbiss, dexman, Curlycord, RATHER BE FISHING, Talbot, JBean3329, Mercenary Roadie, morephones, Touch Tone Tommy, Jeffrey Cohen, Butch Cassidy, DMontgomery, Ruben, conxtel, pdxjim911, Biztel Cuban Okie Tech, ronaldjamesh, dans, Daniel, Memphisribs, Meyery2k, newtecky, tylan, CSB, ILE, Bezzor, westerntelephone, KRRath, mike b, erniejoey, gelehu, iatech3800, Rok1215, Droptop, Arthur P. Bloom, mongo5150, vicbob), 613 guests, and 55 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums95
Topics93,721
Posts635,864
Members49,288
Most Online5,661
May 23rd, 2018
Today's Birthdays
abedalsalam, Curt Morehouse, Grayci, John G, pjnestor
Newest Members
Taulbs, nikauri, Darrel Mullins, fleming23, AKP
49287 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
Bob-o 14
dexman 9
ILE 9
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners