atcomsystems.ca/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems 7400 upgrade ver4.30 to 4.53

Hi All
Looking for a bit of advice i need to upgrade a 7400 with all ITP handsets (about 140) from 4.30 to 4.53 can anyone give any advise or dos & don'ts or pitfalls with doing this.we are installing conference bridge and that is the reason for the upgrade
thanks in advance

Make sure you put the conference bridge in the main cabinet if possible (64bit slot).

4.30 to 4.53 isn't a big jump.
You will have to use OSDM with the conference bridge card (at least according to samsung here).

Just do the usual backup of the db, copy the new files to the sd card via card reader (apparantly uploading the files via it tool isn't recommended with 4.53c on os7200 and os7400). then reset the system, flash the lp40 card(s)

Upgrade any other cards (PRI, MGI, etc) if you want, i usually do the MGI cards.

***edit***
You will need a SPNET license if this system does SPNET, as from 4.4x upwards they charged you for this

Also, how old is the system - was it ever upgraded to v4.30 from an even older version historicaly?

I ask as older hardware will require possible bootrom upgrades for MP40 and MGI cards - make sure you check the v4.53 tech bulletin which has all the minimum versions on it.

Who is your Disty?

Hi all
Yes int was originally 4.21 it also has 40 SIP licences for dect.