|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
Can RG-59 be used for cable TV , or is it for camera's ??
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Dec 2002
Posts: 9,423 Likes: 1
Member
|
Member
Joined: Dec 2002
Posts: 9,423 Likes: 1 |
A lot of older cable TV installs used RG-59, copper coated steel with an aluminum braid. It has a thinner center conductor. It is still in use in a lot of places but is not used for new installs of CATV. The RG-59 for CCTV is a copper conductor and 95 percent copper braid.
Jeff Moss Moss Communications Computer Repair-Networking-Cabling MBSWWYPBX, JGAE
|
|
|
|
Joined: Feb 2005
Posts: 12,344 Likes: 3
Member
|
Member
Joined: Feb 2005
Posts: 12,344 Likes: 3 |
RG-59 can be used- for short runs. It's loss at the high end of the CATV frequencies makes it unsuitable for new installs and anything over a few feet. Keep in mind also, and we have discussed this before, there are different types of RG-59. The old mil spec that has a copper braid over a solid polyethylene dielectric is common for video but has the highest loss but at video frequencies it's no problem.
The current RG-59 type cable has an aluminum braid over foil which is over a foam polyethylene dielectric. This will have a lower loss than the mil spec and is what was used for CATV until they added more channels to the top end making an RG-6 type cable necessary.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Joined: Jun 2005
Posts: 261
Member
|
Member
Joined: Jun 2005
Posts: 261 |
The other problem with a lot of RG59 is the amount of shielding, some have only 50-60%, which is marginal for OTA, but unacceptable for CATV or SAT.
With CATV, the problem isn't as much noise leaking in, but signal leaking out causing interference to other services such as public safety.
|
|
|
|
Joined: Sep 2007
Posts: 1,173
Member
|
Member
Joined: Sep 2007
Posts: 1,173 |
Get RG-6 whenever you can.
|
|
|
|
Joined: Aug 2007
Posts: 59
Member
|
Member
Joined: Aug 2007
Posts: 59 |
I would also suggest RG-6, i would think the price would be worth using a lower grade cable.
Wagner Low Voltage (901)870-6104
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
The problem is all I need is 3 runs , and will have to buy 1000 feet spool and it needs to be plenium, so I dont want to have to purchase 1000 feet for 3 runs. We will never probably use it again. I have a small spool of RG-59 plenium was hoping it would work.
thanks for the responces
|
|
|
|
Joined: Jan 2005
Posts: 15,378 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,378 Likes: 13 |
Steve: Perhaps this might help to soften the blow as opposed to buying a full reel: MCM Electronics ( www.mcminone.com or 800-543-4330) in Ohio sells plenum-rated RG6 in 500 foot spools. Their part number for it is 24-4955.
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: Jun 2007
Posts: 356
Member
|
Member
Joined: Jun 2007
Posts: 356 |
we put baluns on twisted pair when we had to do runs in plenum space. plenum coax is rediculously priced, always has been.
security system suppliers stock the baluns.
it's all tip and ring
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
I like Franks idea, I'll check on the baluns
|
|
|
Forums84
Topics94,287
Posts638,787
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
|
|