|
|
|
|
Joined: Oct 2002
Posts: 723
Member
|
OP
Member
Joined: Oct 2002
Posts: 723 |
I just got a 84 ...came with a CRT. I hooked up my laptop to the RJ45 progr.port -hit escape-nothing...reset system and get the password page...hit escape..nothing..frozen... CNTRL P ...nothing. Plugged into the CRT- RJ45...same thing. Haven't tried the CRT yet.. Is there a jumper set for the CRT that somehow isn't allowing me to log in with a regular pc?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
84 system
RS232 ports on IDS are ports 1 and 2
Port 3 is RS422 used for Operator Terminal (Wyse Terminal)
Baud Rate: 9600
Data Bits: 8
Parity: none
Stop Bits: 1
Terminal Emulation: TVI920
Protocol: Xmodem
Cable Pin out for PC connection:
DB25 to RJ45
7 4 Black
2 5 Yellow
3 6 Green
Base Cord straight through 8 wire
Good Luck!!
[This message has been edited by JJ (edited October 21, 2003).]
If all else fails, use a BFH.
|
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
The CRT will have a diferent pinout I believe than the PC.If you get the screen and pressing escape doesn't do anything then it sounds like your Tx and the 84's Rx line are not connected properly.Try the CRT like you sugeested.
|
|
|
|
|
Joined: Oct 2002
Posts: 723
Member
|
|
OP
Member
Joined: Oct 2002
Posts: 723 |
After resetting and a failed attempt to get the CRT to come up....I went back to try to get into programming and IT WORKED!....I guess it needed to be "tweaked" around with before it would come up.....funny thing...I put in another 22350 (CPU) and it wouldn't come up...this one wouldn't come up after multiple trys.. faulty backplane (motherboard)?????
|
|
|
|
Forums84
Topics94,287
Posts638,792
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
161
guests, and
276
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
