sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems ESI Telephones & Systems IVX S-Class

I have inherited a customer that has an IVX S-Class Gen II and they wanted to add a phone and moved some of their existing sets by themselves. I have administrators' programming guide but there is no way to change the phone type even if I log in with the installers' password. Any thoughts?
Thank you,
Jerry

If they are just moving some phones whay do you need to change the type ?

They had some cordless phones and some 24-button sets. I don't know why, but the original installer programmed one of the cordless phones to be ext 100. They want a 24-button set there so that the receptionist can perform administrative tasks. (Set time, voice mail messages, etc) Then the new ext. number was not ever programmed so I beleive that it defaults to a key phone and they want a cordless at that ext. Any help would be appreciated.
Thanks,
Jerry

use ESI Access , or go on site and move the cross connects

Steve,
I have the programming software (ESI System Administrator)for the larger systems (50, 100, 200 etc...) but I'm going to assume that Access is only available to certified dealers. We are already certified on Panasonic and Avaya, but I REALLY did not want to become certified for this one small customer. Is there any way of changing that setting through the key sets?
Thanks again for all your assistance.
Jerry

I don't believe so , let me verify

I can't find anything saying you can change it from the phone , also the ESI System Administrator isn't the full programing tool you can only do certain things with it , the programing tool is ESI system programer not Administrator and it is only for the CS systems.

Any ideas where I can purchase the Access software?

If I could make the sufficient changes to the system to get the NSP working, I would also consider hiring a certified dealer from the forum to do the programming remotely for me.

The system has a modem built in.