web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 5 1 2 3 4 5
Joined: Feb 2008
Posts: 209
Member
OP Offline
Member
Joined: Feb 2008
Posts: 209
Here's something I'm still stumped on and need someone to enlighten me and my installers. About a week ago, I had a few jacks terminated at my house after the electrician ran a few new CAT-5 cables in addition to some 23-pair cables for my 1A2 system to be installed someday. (Yeah, I know I could have terminated them myself and saved a bundle, but I didn't have the time and worried I might cut off a wire too short.) Anyway, everything worked fine until last night when I couldn't dial out with my polarity guarded TT phones. And it was the whole house. My thought: the phone co. must have reversed the wires because they all were working, all 17 of them. I asked the installers to come back and modify a jack in our bathroom and reverse the wires. They did at the network interface but the phones still couldn't dial out and showed the polarity was still wrong. I told the installer he must have confused the 2 wires and reverse them again. Same thing again. And wires from phoneco are correct. Well, if switching them outside doesn't work, switch them in the basement. That worked. But how or why?
Wiring goes through DSL filter which is not new and a Viking Ring Booster which was added last week. Any thoughts, guys?


Bill
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jan 2005
Posts: 15,378
Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,378
Likes: 13
The answer sounded simple until I got down to your last few sentences. I'm stumped as well.


Ed Vaughn, MBSWWYPBX
Joined: May 2002
Posts: 17,722
Likes: 18
Member
****
Online Content
Member
****
Joined: May 2002
Posts: 17,722
Likes: 18
Who's your dial tone provider?

Quote
Anyway, everything worked fine until last night when I couldn't dial out with my polarity guarded TT phones.
So polarity wouldn't be the issue.


Retired phone dude
Joined: Sep 2006
Posts: 3,290
Member
*****
Offline
Member
*****
Joined: Sep 2006
Posts: 3,290
Are you saying that these are phones that have built-in polarity guard circuitry, or are they phones to which you have added the PG?

Maybe the phone co installer was confused. He may have understood you to mean that he needed to reverse the wires on BOTH sides of the NID connections. That would essentially negate any reversals. Did you actually watch him do the reversals, or did he just say he did them, and you believed him? I'm not saying he lied to you, just that he may not have understood what he needed to do.

Then, when you did the reversal yourself in the basement, you fixed the problem.


Arthur P. Bloom
"30 years of faithful service...15 years on hold"

Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
is it only the phones with the polarity guard that aren't working ?

can a plain old cheapo phone call out ?

have you tried the polarity guarded phone plugged in at the NID ?

if you dont feel competent enough to swap polarity at the NID or take a jack of the wall and swap the wires how do you feel competent to install a polarity guard ?


Skip
------------------------------------

Serving SW and West central Fl since 1984
Joined: Sep 2006
Posts: 3,290
Member
*****
Offline
Member
*****
Joined: Sep 2006
Posts: 3,290
He said he fixed it already by reversing the wires in the basement.


Arthur P. Bloom
"30 years of faithful service...15 years on hold"

Joined: Feb 2008
Posts: 209
Member
OP Offline
Member
Joined: Feb 2008
Posts: 209
1. Perhaps I used incorrect terminology with polarity guarded. These are old-style 2500 TT telephones that require correct tip and ring to dial out on.
2. My provider is good ole AT&T Indiana.
3. I did not install a polarity guard so I am sorry if I gave anyone that impression. But it is not a matter of competence with me - it is a matter of time and dealing with wiring that has no "give." It comes out of the wall a fixed length - no slack. That is the way the electrician pulled the wire.
4. I saw the installer physically change the two wires in the NID. Today I went out and confirmed he was working on line 1 as we have 2 lines coming into the NID.
5. Yes, I could dial out on a rotary phone or phone without polarity issues.


Bill
Joined: Feb 2008
Posts: 209
Member
OP Offline
Member
Joined: Feb 2008
Posts: 209
6. yes, I used a polarity tester (Radio shack) at the NID and the POTS line was correct polarity. Had no trouble dialing out via NID so problem obviously house wiring.


Bill
Joined: Sep 2006
Posts: 3,290
Member
*****
Offline
Member
*****
Joined: Sep 2006
Posts: 3,290
By definition (and common usage of the language) a phone with a polarity guard "guards" against wrong polarity. There would be no reason to "guard" against correct polarity.

So, older phones, made during the period when the phone company charged extra for DTMF service, did not guard against reversed polarity, for a financial reason. TPC could (and did) reverse line polarity at the MDF when they discovered a subscriber "illegally" using tones to dial out.

Later, when DTMF service became "free" there was no reason to prevent dialing. In addition, with the advent of end-to-end signaling, phones with polarity guards were needed to prevent blocked dialing after call completion that might involve inadvertent polarity reversals.

We're glad you got it straightened out. I would not trust any tester made by RS, though. The best tester is the phone itself. An experienced repairman can pretty much tell wazzup just by listening to the sub's phone.


Arthur P. Bloom
"30 years of faithful service...15 years on hold"

Joined: Feb 2008
Posts: 209
Member
OP Offline
Member
Joined: Feb 2008
Posts: 209
Is the correct phone parlance perhaps "polarity sensitive"? Thanks for explaining the difference to me about polarity guards and why the phone company had the financial interest to not use them.

Even though everything is working, I still can't understand why switching the two wires at the NID did not affect the polarity inside the house. And I saw the installer physically do it.


Bill
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
*****
Offline
Moderator-Vodavi, Vertical, XBlue
*****
Joined: Feb 2009
Posts: 3,136
I'm tempted to say "chalk it up to MF" and leave it at that. However, what if the NIU L1 is wired to your house's L2? I would have confirmed if L1 went dead in the house when the NIU was disconnected.

Thank you for the unintended amusement these two related comments provided for some of us:

Quote
worried I might cut off a wire too short.
Quote
wiring that has no "give." It comes out of the wall a fixed length - no slack. That is the way the electrician pulled the wire.


- Dave S. -

You can never appease your ideologue opponents.

Joined: Sep 2006
Posts: 3,290
Member
*****
Offline
Member
*****
Joined: Sep 2006
Posts: 3,290
You can perform what is known as "piecing out" on the short leads. That means: take a piece of matching color conductor, and connect it to the short lead, using a Scotchlok® , a B-wire connector, or a soldered and shrink-tubed splice.

Use pieces that are about a foot long, and those then become the ends that are "just longer enough" for the job.


Arthur P. Bloom
"30 years of faithful service...15 years on hold"

Joined: Feb 2008
Posts: 209
Member
OP Offline
Member
Joined: Feb 2008
Posts: 209
To Dave et. al.: Glad I could provide you with amusement. I am not an installer or claim to be: I am a collector interested in business phone systems of the '50s, '60s, and '70s. My goal is to install a 1A2 system in my home, which is why I subscribe to this tech forum.
My wire strippers are 40 years old and do not even strip 24G wire. My only professional tool is a 66 punchdown tool, also 40+ years old, and I punched down my first 25-pair cable a week ago.
Can anyone tell me what the acronyms, MF and NIU stand for in the above post?
Arthur, thanks for your tip when cutting off a wire too short.


Bill
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
*****
Offline
Moderator-Vodavi, Vertical, XBlue
*****
Joined: Feb 2009
Posts: 3,136
Ummm... looks like I transposed the first one. It was supposed to be FM. Sorry :dance:


- Dave S. -

You can never appease your ideologue opponents.

Joined: May 2009
Posts: 1,198
Member
*****
Offline
Member
*****
Joined: May 2009
Posts: 1,198
Quote
Originally posted by MNDAVE:
... Besides, don't worry about your tools. I've installed more than a few phones over the years with just a pocket knife and small screwdriver!
So, you’re the guy who’s been punching down on my 66 blocks with a screwdriver? :nono:

Joined: Dec 2002
Posts: 9,423
Likes: 1
Member
*****
Offline
Member
*****
Joined: Dec 2002
Posts: 9,423
Likes: 1
Oh yeah just like the alarm guy who told me his pocket flathead was a punchdown tool!


Jeff Moss

Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
Joined: Feb 2008
Posts: 209
Member
OP Offline
Member
Joined: Feb 2008
Posts: 209
Well, I am not an expert on the NID (which I assume is the same thing as a NIU?) but it looked pretty straightforward to me. He took the W/BL and BL/W wires and switched them twice. One final thought: could the Viking ring booster have some sort of polarity guard, although as I say, it worked just fine for a week?


Bill
Joined: Dec 2007
Posts: 908
Member
Offline
Member
Joined: Dec 2007
Posts: 908
Well if I understand you're last post, if the installer turned them over twice there still possibly reversed. :shrug:

Joined: Jun 2006
Posts: 8,732
Likes: 2
Moderator-Nortel, Computers, General
*****
Offline
Moderator-Nortel, Computers, General
*****
Joined: Jun 2006
Posts: 8,732
Likes: 2
Quote
Originally posted by phonenut260:
...5. Yes, I could dial out on a rotary phone or phone without polarity issues.
There's your answer. The telco has "lost" the TT function at the CO. Their problem, not yours.


Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
Joined: Sep 2006
Posts: 3,290
Member
*****
Offline
Member
*****
Joined: Sep 2006
Posts: 3,290
"He switched them twice." That's what I thought he did. That means he (A) didn't know what he was doing, and (B) didn't know what he was doing.


Arthur P. Bloom
"30 years of faithful service...15 years on hold"

Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
*****
Offline
RIP Moderator-Mitel, Panasonic
*****
Joined: Dec 2005
Posts: 7,056
"5. Yes, I could dial out on a rotary phone or phone without polarity issues."
----------------------------------------------------------------------------------------------------------
If I read this correctly OP says rotary AND DTMF with inherent polarity guard work correctly. That would indicate that the C.O. still has DTMF receivers assigned.


When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
Joined: Feb 2008
Posts: 209
Member
OP Offline
Member
Joined: Feb 2008
Posts: 209
Thanks for your additional comments but here is some more clarification:
1. The CO side of the NID was tested and was the correct polarity and I could dial out.
2. During this episode, one jack with reversed wiring did show correct polarity and I could dial out.
3. Yes, if the wires were reversed twice they would be back to original but remember, they were switched once in the basement.


Bill
Joined: Oct 2010
Posts: 250
Member
Offline
Member
Joined: Oct 2010
Posts: 250
Put the handset to your ear and punch a few numbers on the pad. If you here the dtmf tones your line is straight. If you get dead air its reversed.

loop start
T - GRND
R - -48vdc


Forty six years and still fascinated with Telecommunications!
Joined: Feb 2008
Posts: 209
Member
OP Offline
Member
Joined: Feb 2008
Posts: 209
John, that's what I did initially to discover that I had a problem and on all the jacks. The problem is fixed now.
Arthur, I was the one who made him switch the wires twice at the NID because I thought he made a mistake the first time. I watched him do it a second time and still got reversed polarity. Here is a summary:
1. All jacks showing reversed polarity. Must be a Ma Bell problem.
2. Installer switches wires at NID for 1st time. All jacks still showing reversed polarity, CO line correct polarity.
3. I think installer must have accidentally not switched them, so I ordered him to switch them again while I watched him do it. All jacks still showing reversed polarity.
4. Wires switched in basement. All jacks OK.
Bottom line: this seems impossible and why I posted this to the forum.


Bill
Joined: May 2002
Posts: 17,722
Likes: 18
Member
****
Online Content
Member
****
Joined: May 2002
Posts: 17,722
Likes: 18
You said you have two lines. Are you sure he reversed the correct line at the NID?


Retired phone dude
Joined: Feb 2008
Posts: 209
Member
OP Offline
Member
Joined: Feb 2008
Posts: 209
Yes, I thought of that as well. I can verify which is line 1 and line 2 as I have speed dial on line 1 but not line 2.


Bill
Joined: Sep 2006
Posts: 3,290
Member
*****
Offline
Member
*****
Joined: Sep 2006
Posts: 3,290
There are easier ways to ID telephone lines.

ANA and CID are two of them.


Arthur P. Bloom
"30 years of faithful service...15 years on hold"

Joined: Feb 2008
Posts: 209
Member
OP Offline
Member
Joined: Feb 2008
Posts: 209
OK, I'll bite. What do ANA and CID stand for?


Bill
Joined: Sep 2006
Posts: 3,290
Member
*****
Offline
Member
*****
Joined: Sep 2006
Posts: 3,290
What does phonenut stand for?


Arthur P. Bloom
"30 years of faithful service...15 years on hold"

Joined: Mar 2006
Posts: 328
Member
Offline
Member
Joined: Mar 2006
Posts: 328
I think Arthur was referring to ANI (automatic number identification) and CID (caller id). They two are not related nor compatible with each other. ANI is only available to WATS (wide area telephone service) subscribers such as toll-free services. ANI identifies the billing number of the calling party. ANI is not blocked by feature codes, and (someone correct me if I'm wrong), it can't be spoofed easily like CID can.


Hackbarth Communications, L.L.C. - Serving South Central Wisconsin's Telecom Needs
Joined: May 2002
Posts: 17,722
Likes: 18
Member
****
Online Content
Member
****
Joined: May 2002
Posts: 17,722
Likes: 18
ANA is automatic number anouncement. Most of your carriers use it. When you hear "I see your calling from XXX-XXX-XXXX that's ANA.


Retired phone dude
Joined: Mar 2006
Posts: 328
Member
Offline
Member
Joined: Mar 2006
Posts: 328
Ahh I got it now, thanks for the clarification Bill. So ANA is essentially an automated service that uses ANI to read back your telephone number. Around here I've always seen it labelled ANAC but I suppose that 'C' just means circuit.


Hackbarth Communications, L.L.C. - Serving South Central Wisconsin's Telecom Needs
Joined: May 2002
Posts: 17,722
Likes: 18
Member
****
Online Content
Member
****
Joined: May 2002
Posts: 17,722
Likes: 18
ANAC is what you dial into to get the scoop direct from the office switch, most lecs won't give you that number anymore. ANA basically see's the CID and repeats it back to you. If thats not correct I'm sure someone will correct me. laugh


Retired phone dude
Joined: Sep 2006
Posts: 3,290
Member
*****
Offline
Member
*****
Joined: Sep 2006
Posts: 3,290
ANA is the announcement that occurs when you dial the code. It can be 958, 9580, or some other set of digits. It is a function of the serving CO.

It has nothing to do with CID. CID is FSK that is sent towards the called party during the silent interval between the first two rings by the completing CO.

The phonenut was trying to identify one of two lines by observing whether or not it had a custom calling feature. With CID, the easiest and quickest way to ID a line, if you don't know the ANA code, is to call your cell phone from the suspect line.


Arthur P. Bloom
"30 years of faithful service...15 years on hold"

Joined: May 2002
Posts: 17,722
Likes: 18
Member
****
Online Content
Member
****
Joined: May 2002
Posts: 17,722
Likes: 18
Then I agree with hacky. I call that the ANAC. I thought you were talking about the call announcement almost all LEC's and LD carriers use, which is based on the incoming CID.

EDIT: to add all the 958 CO codes are long gone around here and other areas I've worked in. It's now either an office code other than 958 or a toll free number that needs a password. Some of the milliwatts and quiet terms remain but that's about it.


Retired phone dude
Joined: Dec 2002
Posts: 9,423
Likes: 1
Member
*****
Offline
Member
*****
Joined: Dec 2002
Posts: 9,423
Likes: 1
There's a 1K test tone number that still works out of the CO near my house.


Jeff Moss

Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
Joined: Dec 2007
Posts: 71
Member
Offline
Member
Joined: Dec 2007
Posts: 71
The 958 code still works here in NJ for Verizon CO's. Also the old automatic ringback code works as well (I'm not sure what it is officially called.)

When I was 13 a NJ Bell tech came to my parent's house to repair the static on their line (water in the splice boot.) The guy let me tag along and watch him, and he showed me the automatic ringback number that the techs used. From my parent's exchange you would dial 551 Then you would "flash" the line and hear a steady tone. Once you got the tone you would hang up, and a few seconds later the CO would ring you back. He told me that the exchange code would vary from 550 to 554 depending on the exchange you were calling from. I never found out how or why, but this works for my exchange using 553. Both of these things have proven to be very useful over the years.


Lou

Joined: May 2007
Posts: 5,058
Likes: 5
Moderator-1A2, Cabling
*****
Offline
Moderator-1A2, Cabling
*****
Joined: May 2007
Posts: 5,058
Likes: 5
Here in Brooklyn the ringback code was "660 6".


Sam


"Where are we going and why are we in this hand basket?"
Joined: Jan 2005
Posts: 15,378
Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,378
Likes: 13
NOT PUBLIC INFORMATION!

Come on, guys!


Ed Vaughn, MBSWWYPBX
Joined: Sep 2006
Posts: 3,290
Member
*****
Offline
Member
*****
Joined: Sep 2006
Posts: 3,290
These are obsolete codes, for the most part. You can go back and delete the references in my posts, if you want to.


Arthur P. Bloom
"30 years of faithful service...15 years on hold"

Joined: Dec 2007
Posts: 71
Member
Offline
Member
Joined: Dec 2007
Posts: 71
Sorry Ed...didn't mean to offend. I didn't think it was a big deal because these codes are published all over the Internet. If you do a simple Google search you will find them. You will even find international codes.

Lou

Joined: May 2002
Posts: 17,722
Likes: 18
Member
****
Online Content
Member
****
Joined: May 2002
Posts: 17,722
Likes: 18
I didn't think they were detailed enough to do anyone any good. After a re-read I do see a couple, those I'll edit.

Most folks outside the business wouldn't know what we're even talking about, but Ed's right if they want something like that let them dig for it.


Retired phone dude
Joined: May 2002
Posts: 17,722
Likes: 18
Member
****
Online Content
Member
****
Joined: May 2002
Posts: 17,722
Likes: 18
OK let me, or one of the mods know if anyone thinks it needs even more editing.

The OP took it down this path anyway so that's the only reason we didn't direct it back on topic.


Retired phone dude
Page 1 of 5 1 2 3 4 5

Moderated by  ChrisRR, EV607797, Silversam 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5