|
|
Joined: Aug 2007
Posts: 5
Member
|
OP
Member
Joined: Aug 2007
Posts: 5 |
Hello All, Working with an inherited Infostar/VX2.
Setting up the sys from scratch after a hardrive
failure.
Set up my admin mailbox and other fields. bUT, still can not get into 436# Infostar thru handsets.
Ideas? more details below
thanks to all!
I can program thru hub and operator console.
I filled in no NODE fields as I have no info on them.
I called up and filled in every category that I
remeber having prior.
Prior i replaced harddrive and reloaded all startup software so now and dealing with returning to orig co. setups/mailboxs.
JobeM
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2005
Posts: 134
Member
|
|
Member
Joined: Dec 2005
Posts: 134 |
do you get rna when dialing 436?
if it's vmi integration make sure the vms exts
are progammed in the vx2.
|
|
|
|
|
Joined: Aug 2007
Posts: 5
Member
|
|
OP
Member
Joined: Aug 2007
Posts: 5 |
Thanx Dodger, I do get RNA when dialing in.
I have the sys OnLine,also of course.I'll look again at the mvs exts,but have recreated as they exisited before.
have not filled in nodes areas or line setup tho
JM
JobeM
|
|
|
|
|
Joined: Aug 2007
Posts: 5
Member
|
|
OP
Member
Joined: Aug 2007
Posts: 5 |
Info- Phones work,call-in/call out, tho not in day mode,night only.
could use some real input on this.
My Voicemail sys is out completely.
Currently I have new drive and all startup progs in.
I'm putting back in our Co. spec an screens but seem to lack some input info.
No manual info on NODEs
Line setup screen, node setups,comport setups were set up by others and the info is there now.
all calls to VM is RNA, direct or indirect.
no way in (from 436# etc).
JobeM
|
|
|
|
|
Joined: Feb 2005
Posts: 1,037
Member
|
|
Member
Joined: Feb 2005
Posts: 1,037 |
Are your analog ports ringing? Are they programmed into HG 436? What happens where you dial the analog stations directly? Is the software key/Dongle on the VXII?
|
|
|
|
|
Joined: Aug 2007
Posts: 5
Member
|
|
OP
Member
Joined: Aug 2007
Posts: 5 |
phones are ringing,functioning normal.
the SW Key is in place.
Its the voicemail access's which are down.
when I try my vm at my phone, ring no answer (RNA), when I try to get into vm from another phone RNA, when I try to call or access my administrators ext, RNA.
I have programmed my Admin ext back into the hub
in as many screens as I know, I beleive more input fields have to be punched in (replaced due to new hardrive).
I listed above the suspected missing/needed setups. thoughts? Thnx!
JobeM
|
|
|
|
|
Joined: Dec 2005
Posts: 134
Member
|
|
Member
Joined: Dec 2005
Posts: 134 |
Is it vmi integration or in-band?
If vmi double-check the com ports-vx2&ids.
Is the rabbit running at the bottom of the vx2 screen? If you run an f3 clean-up does anything happen?
|
|
|
|
|
Joined: Aug 2007
Posts: 5
Member
|
|
OP
Member
Joined: Aug 2007
Posts: 5 |
this help is welcomed
the rabbit is running
I have com ports so I must be VMI Integration
I'm focusing on getting my admni box open and accesible first and that is set-up
clean-up runs thru the series of mailbox from my chosen start point.
JobeM
|
|
|
|
|
Joined: Dec 2005
Posts: 134
Member
|
|
Member
Joined: Dec 2005
Posts: 134 |
If vmi check the port on the ids-it might have
changed.should be computer port-yes.
type 099,4800 baud.Also make sure the cable is
connected good.(that's happened to me)
|
|
|
|
|
Joined: Dec 2005
Posts: 134
Member
|
|
Member
Joined: Dec 2005
Posts: 134 |
One more thing. Even if the values look correct,try changing them,then put right values in.Sometimes those ports lock up.
|
|
|
|
Forums84
Topics94,283
Posts638,765
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Keyset6, Andyreed),
155
guests, and
170
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
