|
|
|
|
Joined: Nov 2007
Posts: 10
Member
|
OP
Member
Joined: Nov 2007
Posts: 10 |
I have a question about a contel executone phone system. I have a customer that has 3 lines and is adding a 4th. I thought it would be as simple as plugging the new line 4 into CO4 port on the system. I am not familiar with this system does anyone know how to program the system to accept the 4th dialtone line
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2005
Posts: 1,037
Member
|
|
Member
Joined: Feb 2005
Posts: 1,037 |
:toast: There is a link above of installers that should help. If your familiar with programming on the system there are also a manuals link. You state that it's a Contel Executone system, that may indeed be the Encore CX came in a couple of sizes 3672, 816, and 512. Is it a flat pack system or is it a box the holds circuit cards inside it? Most programming is done via Station 100 and is not real difficult with the programming manual.  once again.
|
|
|
|
|
Joined: Nov 2007
Posts: 10
Member
|
|
OP
Member
Joined: Nov 2007
Posts: 10 |
the system itself is flat and wall mounted it has a small card in the middle that says 408/816 it also says do not remove. I am not familiar with programming this system at all. I dont know if anyone can help me. It being an older system I thought it would be as easy as plug line 4 into system and done. I should have known better.
|
|
|
|
|
Joined: Feb 2005
Posts: 1,037
Member
|
|
Member
Joined: Feb 2005
Posts: 1,037 |
It's really not that difficult of a key system to program, as long as you have some programming experience in this field. The programming steps for what your asking is a non-difficult procedure.
|
|
|
|
|
Joined: Jan 2008
Posts: 27
Member
|
|
Member
Joined: Jan 2008
Posts: 27 |
That 408/816 card is in the middle is the SW and memory for the system. DON'T remove that. You go into installer level and set up flash 30 for the CO lines.
|
|
|
|
|
Joined: May 2003
Posts: 2,267
Member
|
|
Member
Joined: May 2003
Posts: 2,267 |
You do realize that you posted on a thread last posted on in November of last year?
I somehow doubt that the problem has not yet been resolved at this point in time.
|
|
|
|
|
Joined: Jan 2008
Posts: 27
Member
|
|
Member
Joined: Jan 2008
Posts: 27 |
Well thanks for the extremely unkind reply. paul. After all, I'm sure you have never done anything socially unacceptable.
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
159
guests, and
273
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
