web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Apr 2004
Posts: 31
Member
OP Offline
Member
Joined: Apr 2004
Posts: 31
I am installing a Axxess system with 4.4 software. currently its setup with two POTS lines on a LSC card, and a 23 B channels on the PRI.

The Telco turn up the B channels this morning, incomming calls work no problem, but I can not place any outgoing calls on the PRI.

when I try to grab trunk group 9202, which is the one that has the B channels I get a busy signal.

The Telco, is telling me I am not passing them any digits to be dialed. here is a sample from the switch station logs froma test ran this afternoon..

<== 01:15:11:00.82 (CM Time: 26:16:28:52.98).



<== Q931: SETUP: from S[7044] L[1,538,0] E[175,537,0] SPA[----]

CR: 0,00 04

BC: speech

64 kbit/s

circuit mode

mu-law speech

CID: 18

LENGTH: 03



Channel Selection Info: As Indicated in Following Octets

D-Channel Indicator: D-Channel NOT indicated

Preferred/Exclusive: Exclusive

Interface type = primary rate



Interface Identifier: IID Implicitly Identified

Channel Type: B - Channel Units (3).



Number Map: Channel is indicated by the number following.

Coding Standard: CCITT

Channel Number = 15

CDN: e164

local_directory_number









==> 01:15:11:00.86 (CM Time: 26:16:28:53.02).



==> Q931: REL COM: to S[7044] L[1,538,0] E[175,537,0] SPA[----]

CR: 1,00 04

CSE: public_network_serving_local_user



destination_address_missing/non_existent_cug


the PRI is a NI2 on a DMS100 switch, passing 4 digits for the DNIS

I have checked to Make sure the stations are set for outgoing access on trunk 9202.

Something is telling me I am overlooking a minor detail in the programing but i have check everything i know to check. but i am limited in knowledge on the programming side of the axxess.. some areas that i am wondering about where i could have made a mistake, is the toll restriction feature? and ARS???

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Oct 2003
Posts: 172
mrb Offline
Member
Offline
Member
Joined: Oct 2003
Posts: 172
i'm no expert but there is a line stating "D-Channel NOT indicated" Did you check with Telco to insure they were sending it. also, you need a PRI Daughter board on the T1C in order to accept PRI from telco.


Moderated by  Stix1 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,110 Shoretel
187,716 CTX100 install
186,809 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
pvj 4
jc2it 4
Who's Online Now
1 members (OBT), 69 guests, and 417 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5