web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#52276 11/04/04 12:18 PM
Joined: Nov 2004
Posts: 3
Member
OP Offline
Member
Joined: Nov 2004
Posts: 3
Guys I am wondering if you can help we have been using the Axxess system for a while now and have been using off site phones with no problems. Until we added a NEW!!! 8.2 IPC card we then added a end point with the lastest firm ware, the phone connects to the card however there is no voice I can get a dial tone. where as the same phone with a older firm ware connecting to a older type IPRC card works fine.

I can get the new one working, by opening ports and doing some nat and pat on the off site router but that way it needs a public IP address for any phone I want to use behind the fire wall (remote) this is not good, and the way i feel right now I want to go back to the old version as it worked nicely. Has anyone had the same probs or has a solution

I have spoke to inter-tel in the uk and the responce I get back is...it does work !!! hmmm not from where I am sitting

PLEASE PLEASE if anyone has any advise I would be happy to listen [Linked Image from sundance-communications.com]

many thanks

Robbie

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#52277 11/05/04 02:24 AM
Joined: Oct 2003
Posts: 172
mrb Offline
Member
Offline
Member
Joined: Oct 2003
Posts: 172
You have found that proverbial slippery slope. Here's the deal. If you upgrade the IPRC to 8.x firmware there are benefits: more ports, more endpoint choices, eventually networking & endpoints on the same card. BUT, you saw it coming, there is a drawback: the card cannot sit behind a firewall or use NAT. It must be placed in a DMZ off of your router. The reason is how we now signal to the card. So, if you are only using 8660's, not the new 8662's, et al. then you can downgrade the card to 1.5, slap on the old PAL and it will work the way it did previously. The no audio you are dealing with is a classic firewall issue. Cheers.

#52278 11/05/04 04:47 AM
Joined: Nov 2004
Posts: 3
Member
OP Offline
Member
Joined: Nov 2004
Posts: 3
Now this is the strange thing, thanks for the reply, I have the IPC card natted behind a router and I also have the end point behind a router I can get it all to work but it requires modifications to the end points router not the switch side firewall.

if i put the switxh side in a DMZ ect i don't think it would make a diference as i would still need to create access list and nat/pat enteries on the end point firewall/router.

#52279 11/05/04 04:49 AM
Joined: Nov 2004
Posts: 3
Member
OP Offline
Member
Joined: Nov 2004
Posts: 3
what is the old PAL lol


Moderated by  Stix1 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,109 Shoretel
187,715 CTX100 install
186,806 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
pvj 4
jc2it 4
Who's Online Now
1 members (Curlycord), 142 guests, and 414 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5