|
|
Joined: Jan 2005
Posts: 15,378 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
OP
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,378 Likes: 13 |
On the larger systems, like those pushing 300-400+ ports, how is the output cabling handled? Is it just standard 25 pair connector cables for stations and trunks? I know that the smaller systems use the one-pair connectors. I like those, but I wonder how practical they would be on larger configurations.
Ed Vaughn, MBSWWYPBX
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2004
Posts: 5,722
Member
|
|
Member
Joined: Dec 2004
Posts: 5,722 |
Ed, remember the two cabinet motel I did? The TDS 600 still uses the single pair set up but I used the 25 pair cable to a 66 block via the dds connectors. In some ways the amp connector would be nice but the flexibility of the individual cables makes it better to display.
Ken
---------
|
|
|
|
|
Joined: Sep 2005
Posts: 9,285 Likes: 6
Admin
|
|
Admin
Joined: Sep 2005
Posts: 9,285 Likes: 6 |
All the systems use the same expansion cards so the 2 pair push connector is used for all systems. I normally use Cat 5 cable from KSU to 66 blocks, 2 cables per card gives you all 8 stations.
|
|
|
|
Forums84
Topics94,287
Posts638,786
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
