web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#526236 01/08/09 10:54 AM
Joined: Oct 2003
Posts: 694
Member
OP Offline
Member
Joined: Oct 2003
Posts: 694
I have a customer who has a 2811 router they are trying to configure for paging. They were told to hook paging system to fxo port on router. What they can't get an answer to is how to configure so pages goes over this port. It is only about 6 months old running call manager. I am not a cisco guy just a plain old telephone tech, but I told them I would see if I could help get some answers. Everytime they call the installer it is 350 whether they fix the issue or not. Thanks for any help.


Shawn
Connect Telecom www.connecttelecom.us
In matters of style, swim with the current. In matters of principle, stand like a rock. Thomas Jefferson
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#526237 01/11/09 10:31 AM
Joined: Nov 2008
Posts: 65
Member
Offline
Member
Joined: Nov 2008
Posts: 65
What kind of paging system is this connecting to, and what would this paging system be expecting if it were on a more traditional piece of telecom equipment? Just an off-hook for a talk path or does it go into a system where you need to outpulse a few digits to open the page?


--Matt
#526238 01/11/09 10:43 AM
Joined: May 2003
Posts: 582
Member
Offline
Member
Joined: May 2003
Posts: 582
SIP paging or IP paging?

#526239 01/11/09 12:22 PM
Joined: Aug 2005
Posts: 131
Member
Offline
Member
Joined: Aug 2005
Posts: 131
What I have done with these is to hook a Valcom V-9970 to an ATA and flip switch 8 on from the default setting. Assign the ATA port with a DN and just dial the DN. We have at least 50 of them installed.

#526240 01/12/09 01:17 AM
Joined: Feb 2008
Posts: 683
Member
*****
Offline
Member
*****
Joined: Feb 2008
Posts: 683
I'm not sure whether this helps or not, but while taking my dad to the radiologist's office for a CAT scan and bone scan, I noticed they had a call manager on site, but they were still using an old Nortel key system for overhead paging. I guess my point is, can it even be done?


St Petersburg
#526241 01/12/09 04:37 AM
Joined: Oct 2003
Posts: 694
Member
OP Offline
Member
Joined: Oct 2003
Posts: 694
It is connecting to a valcom 2001 page control. I would assume ip paging, as it would happen over their internal network. It appears from the paperwork that it needs a co line position or a loop start trunk port.
Input impedance 600ohms
input level -10dbm nominal

When I hook this to a norstar system I just use the page tip and ring from the eq.

They have it working at the main facilty with a valcom 2009 controller, but they tell me the eq at this place is somehow different.
Hope this helps.


Shawn
Connect Telecom www.connecttelecom.us
In matters of style, swim with the current. In matters of principle, stand like a rock. Thomas Jefferson
#526242 01/12/09 03:17 PM
Joined: Aug 2005
Posts: 131
Member
Offline
Member
Joined: Aug 2005
Posts: 131
As I mentioned just hook this up to an ATA. You can even leave the 2001 in place and hook the 9970 to the music input on the 2001. It works great. Why someone would leave a MICS or CICS in for paging, obviously they didn't know how to interface it into Call Manager.

#526243 01/13/09 01:43 AM
Joined: Feb 2007
Posts: 319
Member
Offline
Member
Joined: Feb 2007
Posts: 319
I see it all the time, two phones on peoples desk one cisco and one of the old phone just for paging....

Hay Gcave Can the call manager page through the phones? I know the uc500 can, but have not got to work on a full call manager yet..

another question is can asterix page through the speaker on the phones?


PBX Battery backup systems

www.telcom1.net
#526244 01/14/09 02:14 AM
Joined: Dec 2006
Posts: 810
Member
Offline
Member
Joined: Dec 2006
Posts: 810
Quote
Originally posted by www.telcom1.net:
I see it all the time, two phones on peoples desk one cisco and one of the old phone just for paging....

Hay Gcave Can the call manager page through the phones? I know the uc500 can, but have not got to work on a full call manager yet..

another question is can asterix page through the speaker on the phones?
It can. It is really a phone brand specific feature though. Polycom phones and Aastra support it and I'm sure some others.


Pat Austin
Teleco Inc.
Product Manager/Sales Engineer
Adtran ATSP
TCTE/CTP Certified

Teleco Homepage
#526245 01/15/09 01:33 AM
Joined: Feb 2007
Posts: 319
Member
Offline
Member
Joined: Feb 2007
Posts: 319
P2ii do you know if you can page through cisco phones hooked up to astrix?

I have a customer that thinks they have a cisco system because they have cisco phones on their desks but it is really astrix...


PBX Battery backup systems

www.telcom1.net
Page 1 of 2 1 2

Moderated by  5years&counting 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5