web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Aug 2012
Posts: 8
hap1o Offline OP
Member
OP Offline
Member
Joined: Aug 2012
Posts: 8
Alright so a company recently moved and I helped facilitate the move. They are using an intertel axxxess 800 series I think. Got them moved and wired the system in no problems. I can get calls to the axxess but none of the phones are getting power. I didn't change anything within the EVMC. It seems to be that the phones arent getting the power to them. I tried a couple of the phones directly into the line before anything else to see if it will at least get power from there, no dice.

The new place did have existing blocks in place, but I am using only a couple of them. Is it something simple I am missing? Do I need to reinitialize anything from the axxess? I am at a loss.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: May 2002
Posts: 4,295
Likes: 7
Moderator-Avaya, Polycom
*****
Offline
Moderator-Avaya, Polycom
*****
Joined: May 2002
Posts: 4,295
Likes: 7
Please complete your profile

It seems like you lost programming.
I hope you backed it up before moving.
Connect to system and see whats going on.
Lets us know exact verison and we can set you in the right direction.
Ken

Joined: Aug 2012
Posts: 8
hap1o Offline OP
Member
OP Offline
Member
Joined: Aug 2012
Posts: 8
awesome thanks. It looked like it held everything, as the mailbox and extensions appeared from the box. I do have a couple of floppies with a copy of the original DB. That being said I am relatively new to Inter Tel systems. Is there a specific cmd I could run to perform a test? Been difficult for me to find proper manuals.

Thanks again.

Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
*****
Offline
Moderator-Inter-Tel
*****
Joined: Jun 2010
Posts: 797
What pair are you terminating the circuits to on the jack side? Inter-tel uses pins 3 and 6 and is polarity sensitive.

Joined: Aug 2012
Posts: 8
hap1o Offline OP
Member
OP Offline
Member
Joined: Aug 2012
Posts: 8
The majority were already in place. I will look at them. I don't see a model number just access.

Joined: Aug 2012
Posts: 8
hap1o Offline OP
Member
OP Offline
Member
Joined: Aug 2012
Posts: 8
The couple of jacks I've looked at has 2-5 terminated. 2 is o/w 3 is blue 4 blue/w 5 orange

Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
*****
Offline
Moderator-Inter-Tel
*****
Joined: Jun 2010
Posts: 797
Originally Posted by Stix1
What pair are you terminating the circuits to on the jack side?

You will need to cross connect the circuits to the orange pair in the example you gave and make sure the polarity is correct.

Joined: Aug 2012
Posts: 8
hap1o Offline OP
Member
OP Offline
Member
Joined: Aug 2012
Posts: 8
That did the trick. I was on b/w b. thanks so much I'll just have to pay more attn to the hacks

Joined: Aug 2012
Posts: 8
hap1o Offline OP
Member
OP Offline
Member
Joined: Aug 2012
Posts: 8
So it isn't working for every connection. Out of 5 that I've tried only 2 have worked and they are all terminated the same except one. Which has all 3 pairs terminated in the jack. Any thoughts?

Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
*****
Offline
Moderator-Inter-Tel
*****
Joined: Jun 2010
Posts: 797
I would first try rolling the pair as they are polarity sensitive. If that does not work, verify that you have continuity on the right pair in the jack.

Hint: If you put a banjo or ModApt in the jack, verify that pins 3 and 6 have a light on it with your toner. Putting the red lead on 3 and the black lead on 6 should yield a green light if it is correct.

Page 1 of 2 1 2

Moderated by  Stix1 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,710 CTX100 install
186,795 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
2 members (Professor Shadow, pvj), 168 guests, and 246 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5