|
|
Joined: Jul 2005
Posts: 14
Member
|
OP
Member
Joined: Jul 2005
Posts: 14 |
Have a new SV8100 install and I can't get virtual stations to ring anywhere. I have them built in CM11 and they are set to appear/ring on several stations but whenever I call one of them, I just get a busy. This system is the basic 64 port package so I am wondering if I'm just at the port limit. If so, is the ME50 + license going to fix the problem?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2012
Posts: 43
Member
|
|
Member
Joined: Mar 2012
Posts: 43 |
when you went into program 15-07 and placed your function keys, did you also set it up on the function key in 15-09?
|
|
|
|
|
Joined: Jul 2005
Posts: 14
Member
|
|
OP
Member
Joined: Jul 2005
Posts: 14 |
Yes, they are in both progams. I would expect an open ring if it was programmed in 15-07 but not 15-09. Rechecked the numbering plan in 11-01 and 11-04 and they are correct.
|
|
|
|
|
Joined: Apr 2005
Posts: 2,501 Likes: 2
Member
|
|
Member
Joined: Apr 2005
Posts: 2,501 Likes: 2 |
What is the system configuration? This will give you the port count.
We get old too soon, smart too late
|
|
|
|
|
Joined: Jul 2005
Posts: 14
Member
|
|
OP
Member
Joined: Jul 2005
Posts: 14 |
Its a base 64 port and they are all used. Thar is my question. So VE go towards the port count?
|
|
|
|
|
Joined: Sep 2004
Posts: 4,195 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,195 Likes: 2 |
Have you contacted NTAC about this?
|
|
|
|
|
Joined: Jul 2005
Posts: 14
Member
|
|
OP
Member
Joined: Jul 2005
Posts: 14 |
Not yet. Just seeing if anyone had any ideas.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,195 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,195 Likes: 2 |
I didn't think VE counted towards port count but I could be mistaken given all the licensing changes of late. What number(s) are you using for VE if I may ask?
|
|
|
|
|
Joined: Jul 2005
Posts: 14
Member
|
|
OP
Member
Joined: Jul 2005
Posts: 14 |
8020 is one. 3000 another. They are built. in 11-01 and 11-04.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,195 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,195 Likes: 2 |
And you have these properly setup in the numbering plan? So you have all the feature code conflicts resolved and digit 8 and 4 are set for 4? Also you have cleared out all the 3 digit numbers that existed in the numbering plans?
|
|
|
|
Forums84
Topics94,289
Posts638,797
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
