Phone Systems

AtcomCloud Online Store
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jan 2013
Posts: 1
OP Offline
Joined: Jan 2013
Posts: 1
Hi. We have and IWATSU Omega-Voice VMI system. I can set the system time fine, but the time on each phone display is different than the system time. How do I access and set this apparent other time setting?

Note: To set the system time I enter System Management Menu, then System Time Menu, then Set Time.

Thank you for your help.

Atcom VoIP Demo
VoIP Demo
Joined: Mar 2006
Posts: 46
Joined: Mar 2006
Posts: 46
The VM system and the telephone system each have their own clock. To change the time on the LCD display(s) of the phones: From an attendant position, Press ICM, then FEAT, then dial 64 on the dial pad. Using the dialpad, enter the 4-digit time using military hours. You will then get a confirmation tone, and the new time will reflect on all phones with an LCD.

Moderated by  JBean3329 

Link Copied to Clipboard
Forum Statistics
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
sandi ann
Newest Members
Motel6Guy, JustAGuy, Dialtony, FatherLot, RFarrarMD
49,603 Registered Users
Top Posters(30 Days)
Toner 11
Yoda 9
dexman 6
Who's Online Now
2 members (Toner, justbill), 62 guests, and 65 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Best VoIP Phones | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5