|
|
Joined: Feb 2013
Posts: 68
Member
|
OP
Member
Joined: Feb 2013
Posts: 68 |
Some boxes in eManager are grayed out, is this because of the version of software on this board? Using eManager ver. 4.10A32.
Trying to get Caller ID to program location 313-04.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2013
Posts: 68
Member
|
|
OP
Member
Joined: Feb 2013
Posts: 68 |
CTX100 - ACTU1 will accept R3.1MK050 - where can I find this?
|
|
|
|
|
Joined: Aug 2004
Posts: 9,136 Likes: 14
Admin
|
Admin
Joined: Aug 2004
Posts: 9,136 Likes: 14 |
I am confused.... are you answering your own post?
|
|
|
|
|
Joined: Jun 2005
Posts: 2,664 Likes: 5
Member
|
|
Member
Joined: Jun 2005
Posts: 2,664 Likes: 5 |
AR1.02 is pretty old software, but I was not aware that caller ID is not supported.
It is true that the processor's software can be upgraded to up to 3.10MK063. The only place I think you can find this is through an authorize Toshiba dealer.
|
|
|
|
|
Joined: Feb 2013
Posts: 68
Member
|
|
OP
Member
Joined: Feb 2013
Posts: 68 |
Thank You for answering the question, I had done some more reading and thought that was the most logical answer.
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Caller id should be supported even on that old software. It's probably grayed out because eManager wasn't made to go that far back. But it's easier to upgrade the processor's software than to install WinAdmin.
|
|
|
|
|
Joined: Feb 2013
Posts: 68
Member
|
|
OP
Member
Joined: Feb 2013
Posts: 68 |
Is this software update something someone can send me attached to an email or do I have to find a dealer - our last dealer in this area closed (3.10 MK063) Thanks in advance - Lyle
|
|
|
|
|
Joined: Feb 2013
Posts: 68
Member
|
|
OP
Member
Joined: Feb 2013
Posts: 68 |
Installed eManager 5.20B21 and tried to update to Ver.3.10MK063,
everything seems to work up to the point of activate new version.
SM/SD Card shows files when looked at on computer but doesn't show up in eManager SD window - no files in left window of screen. Is there another way to get this to activate?
|
|
|
|
|
Joined: Sep 2004
Posts: 2,017
Moderator-Toshiba, Request an Installer
|
|
Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
You can't just upgrade the software on the processor with Network Emanager. You have to have the proper nhs file for the software level. Find a local dealer!
|
|
|
|
|
Joined: Feb 2013
Posts: 68
Member
|
|
OP
Member
Joined: Feb 2013
Posts: 68 |
I have the file (CIX100_R_MK063)Zipped version and when eManager askes for a location of the file it loads this file into eManager and runs the upgrade but doesn't activate it. Does it need to go to a lower level first from ver. AR1.02MA223.00 to get to this new version of software? Could you list the steps involved. Thanks DD782
|
|
|
|
Forums84
Topics93,959
Posts637,376
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)
