|
|
|
|
Joined: May 2011
Posts: 391
Member
|
OP
Member
Joined: May 2011
Posts: 391 |
I am installing two Valcom V1030C bullhorns on a DSX 80. The bullhorns are in, I have them wired to the power supply. Putting my toner on the voice pair I hear the warble from the speakers very loudly. I cannot however get any sound from the audio out jack. I made page buttons on all the phones. All extensions have full paging capability in CoS. I read that when a page is initiated it opens the audio out too. Nothing is coming out. Am I missing something? I am plugged into the very rear-most jack on the CPU card. Do I need the 2PGDAD?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2005
Posts: 971
Member
|
|
Member
Joined: Sep 2005
Posts: 971 |
Look in Systems options,and check page output gain.
-TJ-
|
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
You have to be using a code that includes External Paging. Go through the Display-- lift handset Press Page (softkey) press ALL. The plug must be just the right size and Mono. If it has more than 1 black line around the tip it's a Stereo.
|
|
|
|
|
Joined: May 2011
Posts: 391
Member
|
|
OP
Member
Joined: May 2011
Posts: 391 |
Ahhh, that must be it. I robbed it from an old set of PC speakers. Thanks.
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
181
guests, and
353
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
