web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Dec 2002
Posts: 40
Member
OP Offline
Member
Joined: Dec 2002
Posts: 40
STSe (v1.00-AFE2) configured 12x24
line 10 was added recently and programmed to ring and appear on only 1 set, customer called, had no line 10.
Found button unassigned, re-assigned, and now no outbound access, you call in and it rings and lights up and you can answer. But when you press button to call out, you get an error tone and display never displays line 10.
I have verified programming as incoming\outgoing, swapped CO cards, swapped Co lines (with known working line), swapped polarity, tried also line ports 11 & 12 (these also do not allow me outbound access), line 9 works fine. Tried re-assigning to other station ports, no outbound access, system re-booted several times, still the same.
I'm stumped???

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jan 2008
Posts: 3,821
Retired Moderator
****
Offline
Retired Moderator
****
Joined: Jan 2008
Posts: 3,821
What trunk group is it in? If it is a private line put it in group 0.


www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.
Joined: Dec 2002
Posts: 40
Member
OP Offline
Member
Joined: Dec 2002
Posts: 40
It was in group 2, I did put it in group 1 with all other lines,,but dial 9 would not grab line 10, straight to 9. I can try group 0.
button assignment display shows it as line 10, but error tone when trying outbound

Joined: Jan 2008
Posts: 3,821
Retired Moderator
****
Offline
Retired Moderator
****
Joined: Jan 2008
Posts: 3,821
If you put it in group 1 but 9 still goes to line 9 then you have some other issue (unless you didn't save it to group 1) if the line is group 2 and the phone extension doesn't have access to group 2 you will not be able to call out on the line. I take it there are no loop keys on the phones either.


www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.
Joined: Dec 2002
Posts: 40
Member
OP Offline
Member
Joined: Dec 2002
Posts: 40
Derrick, it did turn out to be line group access programming issue, which I called myself checking it twice. Any how thx for pointing out the obvious, helps to bounce ideas off others,,,problem resolved


Moderated by  EV607797, JWRacedog, MnDave, nfcphoneman 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,112 Shoretel
187,717 CTX100 install
186,810 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
pvj 4
Who's Online Now
1 members (Curlycord), 44 guests, and 440 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5