web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Oct 2013
Posts: 3
Burgh13 Offline OP
Member
OP Offline
Member
Joined: Oct 2013
Posts: 3
Client has a Samsung DCS with Cadence voicemail.
System went totally down.
Had to replace both power supplies(PSU-60)and the programming was wiped out.
Of course, the cadence has the red light of death on, so I will need to replace that as well, but I have another issue.
There are two cabinets.
The digital station cards are in the first cabinet. The single line set cards, the cadence, and the trunk cards are in the second cabinet.
I am going through the reprogramming and it is as if the Samsung does not see the second cabinet all the way.
I go through and status the stations, but when I get to where the system should give me the extensions on the second cabinet(the single line units), it goes right back to the first station on the first digital card.
The system DOES see the trunks somewhat as I can program them onto the system, but there is a problem there as well.
When I try to access a trunk, I get dead air. When a call comes into the system from the outside, it rings, the caller sees the call connect, but no one can here one another. The CO lines work off the system fine.
I try to program the cadence extensions into group 529, but it tells me invalid extension.
I have a DID card as well in the second cabinet. I programmed that up, but when a DID call comes in, the system does not seem to recognize it and sends the call to operator group 500.
I have tried to use MMC 806 to get the system to recognize the cards, but no dice.
I am familitar with the programming, but do not have any real experience troubleshooting the hardware besides the Cadence and the power supplies. I am wondering if the processor is malfunctioning or if the cards connecting the cabinets are not work, etc.
ANyone have any suggestions?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2005
Posts: 574
Member
Offline
Member
Joined: Jun 2005
Posts: 574
If you default the system it would see both cabinets
Seems yours don't see second cabinet have you tried mmc818 to see if the cards are seen in second cabinet also after you done that might have to put numbers in 724 if not defaulted
I would default system in 812 and put in right country and start again

Joined: Sep 2001
Posts: 2,329
Likes: 7
pvj Offline
Moderator-Executone-Isoetec, Samsung
*****
Offline
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,329
Likes: 7
I've had some strange stuff on a 2 cabinet DCS with one particular customer.I have had a bad EXPN B card but it took the whole cabinet down. I have also had a bad 8DLI card take a cabinet down.Try powering up a basic second cabinet with 1 card at a time and see what happens. If it works then keep adding cards until you have a problem reoccur.
I assume you did a default on the system?

Joined: Oct 2013
Posts: 3
Burgh13 Offline OP
Member
OP Offline
Member
Joined: Oct 2013
Posts: 3
Problem turned out to be the second cabinet itself.
Replaced and all was right with the world, even the Cadence!
Thanks for the suggestions!


Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,712 CTX100 install
186,796 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
jc2it 4
teleco 4
Who's Online Now
1 members (Toner), 116 guests, and 244 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5