web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#556968 08/27/13 11:02 AM
Joined: Aug 2013
Posts: 25
Thinh Offline OP
Member
OP Offline
Member
Joined: Aug 2013
Posts: 25
Hi everybody,
I am appreciate your helps.

1. I have 4 extensions: 4100(analog phone),4101(Digital phone),4102(Digital phone),4103(analog phone)
2. short key for call to 4100 is 10, and 4102 is 11, 4103 is 14

I want incoming call will route to 4101 first, and if 4101 is busy, system will route to 4102, then 4103, and 4100. (of course it is still work for internal call)
So I create 20 is pilot department number for 4 that extensions, and number 10,11,14 is virtual extension. I put 4 extension into department group 2 with priority the first is 4101 and continuous for another. with 10 and 14 virtual extension, I use forward all call to 4100 and 4103, using Land on key mode and Actual Extension Name display to auto answer when lift handset. Then change mode incoming call to DIL for route to pilot number.

But I have a problem with my system:
1. When I call to system from outside it work ok.
2. Internal calls it not work.
3. When I use CLID to display caller ID, that phone ring only 2 times and stop. (Happened when I tick on 14-02-10)

So I post this words to need for all your help. Please help me, I'm in urgent.


Thinh
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Sep 2004
Posts: 4,194
Likes: 2
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 4,194
Likes: 2
Use fixed call forwarding rather than dept groups. These can also be virtual. Simply cfb/na 4101 to 4102 etc. Point lines to 4101.

Joined: Aug 2013
Posts: 25
Thinh Offline OP
Member
OP Offline
Member
Joined: Aug 2013
Posts: 25
Hi Coral Tech,

Can use say more about use virtual extension. I have been used call forward no answer/busy but it is not work for incoming trunk.


Thinh
Joined: Sep 2004
Posts: 4,194
Likes: 2
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 4,194
Likes: 2
You have to DIL to that station. Then simply forward that station to the next etc. Depends on what trunks you are using.

Joined: Feb 2013
Posts: 122
Member
Offline
Member
Joined: Feb 2013
Posts: 122
I suppose you have problem on internal call because you are not used program code 16-04 to permit call between department groups

for Caller ID problem you need to change in program code 81-01-09 try with these values 56, 59, 68, 72, 77, 82 and code 81-01-05

you can try also with command 81-01-12 caller id time detection



NEC Business Partner
Certified on SV8100,SV8500,SL1000
Joined: Sep 2013
Posts: 2
Member
Offline
Member
Joined: Sep 2013
Posts: 2
Dear Mohammad ,

Our SV8100 system has the same problem with Caller ID too , And I try to change almost of parameter in 81-01-x and in 81-09 , 81-10 too but nothing change .Each time I enable Caller ID in 14-02-10 , the incoming call from outside (i use my mobie phone) through DIL to ext 8000 ( operator ext in our system) just rings 1-2 times only and no forward happended but still listen the ring tone on my mobie ,I still format SV8100 and change another CO card but still problem.
Please help me solve this.Thk for advance .

Joined: Aug 2013
Posts: 25
Thinh Offline OP
Member
OP Offline
Member
Joined: Aug 2013
Posts: 25
Dear Jenny Ch and Mohammad,

my problem is the same with Jenny Ch 's problem.


Thinh
Joined: Sep 2013
Posts: 2
Member
Offline
Member
Joined: Sep 2013
Posts: 2
No one help us pls frown

Joined: Apr 2005
Posts: 2,498
Likes: 2
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,498
Likes: 2
Thinh,

Fixed call forward you need to fill in 01-04

Thinh and Jenny Ch,

You need to contact NEC tech support in your area for the caller ID problem, different country's different setups.


We get old too soon, smart too late
Joined: Aug 2013
Posts: 25
Thinh Offline OP
Member
OP Offline
Member
Joined: Aug 2013
Posts: 25
Hi Mohammad Jaffal,

"I suppose you have problem on internal call because you are not used program code 16-04 to permit call between department groups

for Caller ID problem you need to change in program code 81-01-09 try with these values 56, 59, 68, 72, 77, 82 and code 81-01-05

you can try also with command 81-01-12 caller id time detection"

That is a great advice, thanks for your help. I changed para in code 81-01-09, it's okay from 64.


Thinh

Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,113 Shoretel
187,717 CTX100 install
186,811 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
Who's Online Now
3 members (KRRath, Curlycord, BPopilek), 64 guests, and 408 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5