web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Nov 2013
Posts: 1
Member
OP Offline
Member
Joined: Nov 2013
Posts: 1
We have a customer with remote sites connected via wireless. I want to setup the ESI-Link between the sites using their existing network. Is this possible?

Site A (ESI100) 10.10.10.201
Site B (ESI50) 10.10.10.202
Site C (ESI50) 10.10.10.203

Gateway 10.10.10.1
Subnet 255.255.255.0

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: May 2005
Posts: 456
Member
Offline
Member
Joined: May 2005
Posts: 456
IVC cards from different systems can't be on the same subnet. It might work, but it's not supported because there is layer 1 and 2 taffic between cards on the same system that other systems are not supposed to see. You will need a router in front of each card to route the packets. It should work fine if you have good latency, etc.


Brian Dunne
ETC Telecom
www.etctele.com
Joined: Jan 2007
Posts: 1,217
Member
***
Offline
Member
***
Joined: Jan 2007
Posts: 1,217
I've done it once, I don't remember exactly how but I think the gateway of the local site was the IP address of the second site's IVC card.


Aaron
Joined: Feb 2014
Posts: 32
Member
Offline
Member
Joined: Feb 2014
Posts: 32
That is correct, if you only had 2 systems, but with 3 it is not likely you can do this. I am running into the same problem right now at a customer that has 2 remote sites, and 1 site that connects on the same subnet at the 700 cabinet. For some reason it works with the customers Cisco 1800 router at the 700 location, but they swapped it out for a ASA last week, and took down the 702 (locally connected) cabinet. We are thinking about putting a router in front of the 702 site to see if that will fix their issue.


Moderated by  5years&counting, nonameyet 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,694
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,703 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
pvj 4
Who's Online Now
2 members (teleco, BobRobert), 108 guests, and 249 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5