|
|
|
|
Joined: Jan 2014
Posts: 1
Member
|
OP
Member
Joined: Jan 2014
Posts: 1 |
I am installing a XTS-IP system with a flash-8 port voice mail card and I am not able to get the MWI to come on when an ext. has a message in it's box. I have entered the ext. in flash 65-12. Turned on flash 50,B,15 and Flash 50,D,10 set to 0. Do I need to change the MWI codes on and off in the PBX Integration settings. They are set to default-W1:. The MWI will only come on if I reset the system and will clear only with a system reset also.
Last edited by rolls69; 01/27/14 02:26 PM.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2009
Posts: 440
Member
|
|
Member
Joined: Apr 2009
Posts: 440 |
Of all the xts i have installed, the factory intergrate setting does not need to be changed. Nor have i used v.m. group f 65. f50 button 15 light control to 2 then hold.
Gary S.
Gary Stevens
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
You don't need to change integration settings..not for a digital voice mail, only for analog. I suggest you default the voice mail table settings in flash 80 and set them back to default then program your extensions back into voice mail group 440 again. Make sure you have all eight and they are the correct 8 extensions as well.
Last edited by Derrick; 01/27/14 07:08 PM.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Forums84
Topics94,287
Posts638,793
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
131
guests, and
389
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
