|
Joined: Dec 2004
Posts: 236
Member
|
OP
Member
Joined: Dec 2004
Posts: 236 |
The 2 slot carrier takes #4 screws to hold the cards in the carrier, anyone know the length? I have one out there missing the screws causing issues.
I can not recommend any technology platform, only technicians!
|
|
|
|
Joined: Feb 2005
Posts: 12,343 Likes: 3
Member
|
Member
Joined: Feb 2005
Posts: 12,343 Likes: 3 |
Should be easy enough just to look and see what the minimum and maximum length can be, no?
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Joined: Jan 2005
Posts: 15,378 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,378 Likes: 13 |
I just looked at one and it appears to be about 3/4" long.
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
Ed hit it right on the head
4- #4 x 3/4 pan head sheet metal screws
for the modules
2-8-15 31/2 phillips pan head screws.
I hate to ask but the Partner modules are mounted flat on the wall correct. I did see these once mounted sticking out straight from the wall and wire from top to bottom and the cards stuck out straight . True story
It was in the parts dept of a car dealership and the owner said every time they came around the corner they banged into the Partner :}
|
|
|
|
Joined: Dec 2004
Posts: 236
Member
|
OP
Member
Joined: Dec 2004
Posts: 236 |
Thank you gentleman for the help. I am not on site, nor do I have a spare 2 slot carrier, because I don't use them. They have too many issues for me unless installed in a highly protected area. I just could not put my hands on one, and didn't want to have to go back to site because I bought ones too long, or too short. Thank you again!
I can not recommend any technology platform, only technicians!
|
|
|
|
Joined: Apr 2009
Posts: 440
Member
|
Member
Joined: Apr 2009
Posts: 440 |
Been on many service calls where the 2 slot was not screwed to the processor or modular, came loose and system goes down. Easy money because the installed did not do it right.
Gary S
Gary Stevens
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
126
guests, and
369
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|