Phone Systems

Sponsored by Atcom
Get a free phone!
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Apr 2012
Posts: 12
jakusb Offline OP
Member
OP Offline
Member
Joined: Apr 2012
Posts: 12
Hi,

We have an old Samsung Compact II telephone unit, which I would like to program via PC.
For that I seem to need a piece of software called PCMCC.
Does anyone know where to find the correct version (for this Compact II system)? Or even better a download link?

regards,

Jacob

Joined: Jun 2006
Posts: 2,892
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 2,892
You will need to know the version of software your system is running, each version software has a corresponding pcmmc version.
You will also require a misc card in the system, and the correct serial cable to connect between the system and pc/laptop.

Also the pcmmc is a dos application, it won't run on vista or higher.

I have had success running it via dosbox however.

Joined: Jun 2005
Posts: 574
Member
Offline
Member
Joined: Jun 2005
Posts: 574
Good luck finding I have thrown all mine away
just as easy to use a phone instead of using dos program

Joined: Apr 2012
Posts: 12
jakusb Offline OP
Member
OP Offline
Member
Joined: Apr 2012
Posts: 12
Originally Posted by nameless
You will need to know the version of software your system is running, each version software has a corresponding pcmmc version.
You will also require a misc card in the system, and the correct serial cable to connect between the system and pc/laptop.

Also the pcmmc is a dos application, it won't run on vista or higher.

I have had success running it via dosbox however.

I do not know the exact version. Which code do I need to enter on a telephone set to display it?
I do have a Misc-1 card with 2 serial ports as well as the original cable used by the engineer that used to program it.. That person is long gone, as is any of his software... frown
I also have experience with DOSBox, as I use it for a different Samsung DCS where I do have the correct software for. I am able to program that system, unfortunately not yet this other Compact II system....

Any help is very much appreciated smile

Joined: Sep 2001
Posts: 2,259
Likes: 2
pvj Online Content
Moderator-Executone-Isoetec, Samsung
*****
Online Content
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,259
Likes: 2
mmc727 is where you will find the version number
Also should be on the software chips inside the cabinet.

Joined: Apr 2012
Posts: 12
jakusb Offline OP
Member
OP Offline
Member
Joined: Apr 2012
Posts: 12
mcc727 gives:
ROM Version 02.01.26 T7.02

Which PCMCC software tool do I need for this version?
And more importantly, where can I get a copy

Joined: Sep 2001
Posts: 2,259
Likes: 2
pvj Online Content
Moderator-Executone-Isoetec, Samsung
*****
Online Content
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,259
Likes: 2
Well because you are in Europe and I am in Canada we have different software versions.Obviously you need the PCMMC version for that software level but I can't tell you where you might find it.It will have to come from Europe.

Joined: Jun 2006
Posts: 2,892
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 2,892
I have that version. I believe pcmmc is common as it asks you what country you are in on startup.
Email me and I'll send it.

Joined: Sep 2001
Posts: 2,259
Likes: 2
pvj Online Content
Moderator-Executone-Isoetec, Samsung
*****
Online Content
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,259
Likes: 2
Really?I don't think our PCMMC ever asks for the country.
Anyway our DCS50si which I believe was the equivalent of your Compact II last version was 1.6 so much different software.

Joined: Jun 2006
Posts: 2,892
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 2,892
The compact 2 is known as dcs70 here. The 50si was different again.

Page 1 of 2 1 2

Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,379
Posts634,605
Members49,525
Most Online5,661
May 23rd, 2018
Popular Topics (Views)
Today's Birthdays
dcttech, George/wa2vnv, telesalesrep
Newest Members
NiagaraGuy, Luv2uallday, FredSkidoo, tspa, xtrememachines
49,525 Registered Users
Top Posters (30 Days)
Toner 21
dexman 11
R4+Z 6
Who's Online Now
1 members (Mercenary Roadie), 5 guests, and 11 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Telephone Systems Canada | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5