|
|
Joined: Sep 2008
Posts: 27
Member
|
OP
Member
Joined: Sep 2008
Posts: 27 |
I have seen threads regarding this error. the solutions said to make sure the call buttons are programmed. Well.....they are. I have a digital set (DS 5014D)that displays the CBT error along with a fast busy when trying to dial out. I tried to display the station data by entereing transfer + 108 and received Invalid Data Begin Again.
So... I have an extension which is not located anywhere. I can't find the prot that it was on. Like I said, there are call keys assigned. I am using a 7400. Any help would be appreciated.
Thanks,
Scott
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
Does it display an extension number on an idle screen?If it does then you would be able to find out what port it was by cecking the station number plan.Alternatively can you trace the wiring back to the system and see where it's connected?
What are you doing to dial out?Using DT keys or a trunk code ?
How do you know there are Call keys programmed?
|
|
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
|
Member
Joined: Jun 2005
Posts: 574 |
Sounds like no call keys to me
easy way to find out what port if display phone
transfer *08 will show what port you are on * equals a number
|
|
|
|
|
Joined: Sep 2008
Posts: 27
Member
|
|
OP
Member
Joined: Sep 2008
Posts: 27 |
it does not display cabinet slot port when doing a tranfer 108. that is the wierd part. I understand the need for that. An extension is displayed on the screen. I know that there are call buttons assigned because I can use the installation tool and go to MMC 722 to make changes and view the button setup.
Thanks,
Scott
|
|
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
|
Member
Joined: Jun 2005
Posts: 574 |
Just had a mad moment is the extn in the same tenat group believe i had this problem before
|
|
|
|
|
Joined: Sep 2008
Posts: 27
Member
|
|
OP
Member
Joined: Sep 2008
Posts: 27 |
Everythingstarted working again later on that day, July 10th. After I removed and added the CBT three times, it worked.
Thanks,
Scott
|
|
|
|
|
Joined: May 2014
Posts: 2
Member
|
|
Member
Joined: May 2014
Posts: 2 |
not sure If I'll get an answer here considering its an old thread. Having a similar problem. Dont know how to remove or add CBT. If anyone could help me with that, that would be great.
|
|
|
|
Forums84
Topics94,287
Posts638,787
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, KRRath),
163
guests, and
170
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
