web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#572572 06/03/14 10:53 AM
Joined: Nov 2013
Posts: 25
Hnas61 Offline OP
Member
OP Offline
Member
Joined: Nov 2013
Posts: 25
I have a customer that already has one DOC/Door phone, but now they are looking at having me install another similiar setup. Can there be two(2)DOC devices on the same Dry contact port. Some techs here at the office think once triggered, both devices will open. Any ideas or suggestions, I've never installed a DOC before,ut there's a first time everything.

Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Joined: Dec 2007
Posts: 386
Member
*****
Offline
Member
*****
Joined: Dec 2007
Posts: 386
Per the Nortel guide.......dated March of 2000, "each doorphone can communicate with up to twelve DOC's, providing control of up to 12 electrical devices through the telephone dial pad".


BTS
Joined: Feb 2005
Posts: 1,615
Member
Offline
Member
Joined: Feb 2005
Posts: 1,615
"Can there be two(2)DOC devices on the same Dry contact port"
Same dry contact port on what?

"once triggered, both devices will open."
What is the setup?
2 doors with their own door phones? or explain otherwise.

Each DOC can be programmed with their own code via dip switches.

How often is somebody going to ring the front door and ask for reception to open the back door?.
I guess if you are Maxwell Smart then being able to control 12 doors/docs with one door phone might come in handy.

One DOC per Door Phone in a normal environment.


=---()))))))))---=
www.curlycord.com
[Linked Image from telcopc.ca]
Toronto, Canada




Joined: Oct 2012
Posts: 251
Member
Offline
Member
Joined: Oct 2012
Posts: 251
Like Curly mentioned, you can daisy-chain DOC's together to operate multiple doors, gates, etc. from a single door phone - the wiring will be different on the type of lock you are disengaging or gate you are opening which is explained in the installation guide - Otherwise, it is typically a one-to-one with Door Phones & BOC's


www.highspeedtele.com
Dallas & Fort Worth, TX
Joined: Jan 2013
Posts: 36
Member
Offline
Member
Joined: Jan 2013
Posts: 36
OK, I have a customer with one door phone & a door unlock unit which works fine, using '6' to open it (default settings).

What they want to do is open a 2nd door (its actually a gate), but don't want to run another cable to the 2nd gate.
Can the existing door station be configured to dial another digit 7? to open the 2nd door unlock?
As this gate isn't normally used for incoming vehicles (exit only), dialling up the door phone & pressing '7' would be adequate. Can this be done, or would it be easier to put a 2nd door phone next to the system, as a dummy?

Thanks in advance.

Kevin

Joined: Feb 2005
Posts: 1,615
Member
Offline
Member
Joined: Feb 2005
Posts: 1,615
PM sent to plz start your own thread.
Thanks


=---()))))))))---=
www.curlycord.com
[Linked Image from telcopc.ca]
Toronto, Canada





Moderated by  MooreTel 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,280
Posts638,742
Members49,764
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,353 Shoretel
188,181 CTX100 install
187,022 1a2 system
Newest Members
Nadisale, andreww, gohunt, Darrick, telecopippo
49,764 Registered Users
Top Posters(30 Days)
Toner 15
jc2it 4
dexman 4
teleco 4
Who's Online Now
1 members (Professor Shadow), 92 guests, and 93 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5