|
|
Joined: Jun 2014
Posts: 2
Member
|
OP
Member
Joined: Jun 2014
Posts: 2 |
I recently bought a Nitsuko 92030 card to replace one in my PABX that had a power surge (lightning). I am having some trouble configuring it to my system and think the problem could be with the impedance. How can I find out what impedance the card was set for and whether it is possible to change this?
My problem is that although the gate release now works, I get a screeching sound (feedback?) when I try and use the phone.
Bernard
South Africa
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2008
Posts: 683
Member
|
|
Member
Joined: Feb 2008
Posts: 683 |
Forget impedance. There's no adjustment for that.if you swapped one card for another and they are set up identical you should be good. You say it was hit by lightning. How can you be sure other components were not affected? Namely door phone, power supply or CPU.
St Petersburg
|
|
|
|
|
Joined: Jun 2014
Posts: 2
Member
|
|
OP
Member
Joined: Jun 2014
Posts: 2 |
Dear Ron,
All good comments, for which I thank you. When I take out the door card, the PABX works perfectly, but when I insert the new (replacement) door card, the door opens but I get bad feedback on the line. Any other suggestions? I can't see any switches where I can set up the card.
|
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
Have you tried hooking the doorbox up at the MDF ?
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
Forums84
Topics93,960
Posts637,381
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
174
guests, and
40
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
