web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Mar 2013
Posts: 144
usbuild Offline OP
Member
OP Offline
Member
Joined: Mar 2013
Posts: 144
We have Managed IP PRI service from TDS Metro.
18 channels open and block of 30 DIDs.
main(pilot) number is (XXX)XYZ-5850
block of numbers (XXX)XYZ-5110 to (XXX)XYZ-5137

If I call any of our numbers, key for Line 1 will light, second call will go to Line 2 and so on.
All Lines have identical setup:
3101 Loop Start | name and number are blank | DTMF checked
3112 Key Ring with overflow to 801.


How to make calls coming thru (XXX)XYZ-5111 to terminate on particular Line?


According to one TDS technician they send 7 digits to CPE and expect 7 back
Ive tried to setup DID translation entry
3301 to 7 digits
3302 entry 1 to ***5111 | 313 | 313 | TEST LINE | use line
and switched Line 1 to DID Immediate Start. Test calls will not route to 313 extension.

am i missing something?




Last edited by usbuild; 06/30/14 12:20 PM.
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: May 2003
Posts: 2,924
Member
*****
Offline
Member
*****
Joined: May 2003
Posts: 2,924

3101 would be DID immediate start

3121 T1/PRI

give some line keys for incoming, a couple of loops for outgoing.

DID will not go to a particular line, only ext.\\

1213 set channels, clock slave, signal-ISDN NI-2
LOOPBACK-NONE, ESF B8ZS

Last edited by brokeda; 06/30/14 10:23 PM.
Joined: Mar 2013
Posts: 144
usbuild Offline OP
Member
OP Offline
Member
Joined: Mar 2013
Posts: 144
brokeda,
That was set at one point, but for some reason didnt work first time I tried it, I guess there is a delay before programming is applied to the system or has something to do with large volume of calls coming in when I did it.
It does work now, except
I noticed one difference between DID call to extension and actual extension call. With DID call i cant get voice mail of that extension to answer a call, looks like call is using Line Overflow and goes to Key ring.
It does off-premisses call forwarding when turned ON, but wouldnt go to voicemail, strange.
Also tried DID to Group 601 with overflow to extension desired extension, still no voice mail.

Manual says:
If a DID call is unanswered and is eventually routed to voice mail, it will route to the mailbox of the initial DID destination. This is true regardless of whether the call routed to voice mail via DID Line Overflow, Call Forwarding, or Extension Hunting.

Cant figure out how to route to voice mail?

Joined: May 2003
Posts: 2,924
Member
*****
Offline
Member
*****
Joined: May 2003
Posts: 2,924
601 overflow is to 700, it will fall into box 601

If in DID you set number to use line schedule thats what it follows

in 2115 use ALL/BUSY/RNA, set DID Intercept to 700 ICM will then go to VM

Turn off KEy Ring to all sets unless needed.

If number is not assigned as DID it will follow KEY RING

Joined: Mar 2013
Posts: 144
usbuild Offline OP
Member
OP Offline
Member
Joined: Mar 2013
Posts: 144
Brokeda, Thanks, your tips put me in the right direction.
This is how it was programmed:
DID for ***5111 has no entry for day or night translation and follows Sched #2.
Sched#2 rings extension 610 and overflows to 810 (day greeting) or 811 (night)
Dept.Group 610 has no entry for overflow and Voicemail is set to "none".
Incoming calls to (XXX)XYZ-5111 ring extensions assigned to Dept.group 610 if RNA intramail 810 or 811 will route a call to desired menu option.
Remaining DIDs are not assigned and follow Sched #1 set for all lines.












Last edited by usbuild; 07/07/14 07:02 PM.

Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,113 Shoretel
187,718 CTX100 install
186,811 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
teleco 4
Who's Online Now
2 members (justbill, Touch Tone Tommy), 73 guests, and 418 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5