|
|
Joined: Oct 2001
Posts: 6,160
Member
|
Member
Joined: Oct 2001
Posts: 6,160 |
2 things come to mind. I'd rather see the 16 port digital board which was made for the 120 than the 8 port board which was (is) a DX80 board. also, I would download the programming to a laptop with out the 8 port board plugged in. Cold start the system. Add the board back and upload the program. Then you can view and make changes with your laptop or phone. If all that fails you can buy a board that works from me.  Mark
Last edited by Mark K.; 08/12/14 02:50 PM.
|
|
|
|
|
Joined: Jul 2014
Posts: 9
Member
|
|
OP
Member
Joined: Jul 2014
Posts: 9 |
So I "looked" at the program manual. Was able to get a line out(I can dial out) still can't program any keys. Anyone familiar with DET programming that could assist me? I'm trying not to screw up my system so going slow. Again, I'm more than willing to pay someone for this.
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
You're going to have to start with a new station board and then possibly a cold start to have a clean database. If one of those don't work you have a CPU problem.
Mark
|
|
|
|
Forums84
Topics93,833
Posts636,789
Members49,649
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
30
guests, and
27
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
