|
|
Joined: Jul 2014
Posts: 3
Member
|
OP
Member
Joined: Jul 2014
Posts: 3 |
Hi Folks, I have a Toshiba CTX 670 at my main site and a CIX100 at my remote site. The two sites were connected via a PRI using stratanet. I wanted to eliminate the PRI and use IP since I have a 100MB fiber WAN connectivity to the site. On the remote side I removed the PRI card and installed an LIPU. I removed the PRI card in programming but left the existing ILG and OLG in place. Under Trunk-FULL IP Stratanet I created a channel group and used the ILG and OLG that the PRI had used. All worked great. From the remote site I can now place calls over the IP stratanet link.
The problem came in when I tried to do the same thing at the main site. I removed the PRI card from programming and kept the ILG and OLG from the PRI setup. When I try to create the same thing I get an error "The entered ILG is not registered in the system. OR The entered OLG is not registered in the system."
I have deleted and recreated the ILG and OLG. I have created new ILG and OLG using a different number but the error persists. Any idea what I am missing here? I have searched the internet and this seems to be the best place for Toshiba information.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jul 2014
Posts: 3
Member
|
OP
Member
Joined: Jul 2014
Posts: 3 |
Thought I would update this. I added a new LIPU card at the main site at set up stratanet channels and all works well.
|
|
|
Forums84
Topics94,283
Posts638,767
Members49,764
|
Most Online5,661 May 23rd, 2018
|
|
1 members (aweaver),
170
guests, and
299
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|