|
|
|
|
Joined: Mar 2006
Posts: 58
Member
|
OP
Member
Joined: Mar 2006
Posts: 58 |
On a Mitel 200 ICP with POTS lines I have an option on auto attendant to transfer to an outside number. Currently I am doing it through trunk to trunk transfer via speed dial. However the voice quality is poor and we have trouble with the trunks locking up even though CPC disconnect is on the lines and I have the disconnect signal set at the lowest option (100ms). Recently the user had centrex service activated. I have enabled flash over trunk in the trunk circuit descriptors. I have tried to replace the number in the speed dial bin from 9555-XXXX to **3(flash over trunk access code)555-XXXX but the AA replies "that extension is not valid"
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
Shouldn't you be dialing 9555-xxxx, to satisfy the centrex requirement?
Try to troubleshoot the problem using a phone with the same COS as your VMail ports.
If you know how to do it manually, it's easier to make it work automatically!
|
|
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
