|
|
Joined: Dec 2012
Posts: 4
Member
|
OP
Member
Joined: Dec 2012
Posts: 4 |
Hi,
Is there a way on the DKT2010-SD to program a key, that will pick up a specific line and dial (*94 2) and possibly turn the indicator on that button?
The system (DK40) is using the telco voicemail, after office hours, I want to change the number of rings before the voicemail picks up. I can do that by picking the line and dialling *94 2 (2 is the minimum number of rings). Then in the morning, pick the line again and dial *94 5. I'm trying to do this with two keys. Going through program 39, I'm not sure what to use. If there is another way, I'm all ears.
Thanks,
Kevin
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2004
Posts: 399
Member
|
Member
Joined: Jun 2004
Posts: 399 |
System or Station Speed-dial, although ther may be a trick involved to include the '*'. Don't think there's any way to light the LED.
|
|
|
|
Joined: Dec 2012
Posts: 4
Member
|
OP
Member
Joined: Dec 2012
Posts: 4 |
Thank you! Can the speed dial pick up a specific CO line?
|
|
|
|
Joined: Oct 2005
Posts: 612 Likes: 1
Member
|
Member
Joined: Oct 2005
Posts: 612 Likes: 1 |
Yes, store intercom #700X *94 2 in the speed dial bin. Substitute X with the line #.
|
|
|
|
Joined: Jul 2014
Posts: 33 Likes: 1
Member
|
Member
Joined: Jul 2014
Posts: 33 Likes: 1 |
night mode can be toggled with 1 button, it lights up when in "night" mode on whatever set(s) the "night" button is programmed on... might be a bit more involved than you want to get into though.
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|