|
|
Joined: Aug 2005
Posts: 560
Member
|
OP
Member
Joined: Aug 2005
Posts: 560 |
I put a refubed Aspire S into a site recently, so I could network it to an Aspire M at another site. All that is working well.
I set up Intramail on the Aspire S and in general, it's working fine. I have the after hours calls going to a Call Routing mailbox one on the system - with that box using Dial Action Table number one. Pretty sure that's all good.
The issue is that when the caller presses a button for one of the options, nothing happens. Eventually the box times out - but as far as I can tell - the system does not recognize DTMF tones within Intramail.
Wondering if there is a DTMF decoder on the VM daughter board that might not be working? Or, is there some other settings I might have missed? I have set up a number of Intramail over the years, so I think I have this set correctly - but I'm open to suggestions. The Intramail and VM daughter board (like the rest of the system) are used items.......
|
|
|
|
|
Joined: Apr 2005
Posts: 2,481 Likes: 1
Member
|
|
Member
Joined: Apr 2005
Posts: 2,481 Likes: 1 |
Does pressing any button interrupt the AA message?
Is the time out transfer working?
Last edited by dans; 03/18/15 05:04 PM.
We get old too soon, smart too late
|
|
|
|
|
Joined: Aug 2005
Posts: 560
Member
|
|
OP
Member
Joined: Aug 2005
Posts: 560 |
No, pressing the buttons does not interrupt the message. I think timeout transfer is working - but I can't say that I am 100% sure. I will need to have them test that and let me know.......
|
|
|
|
|
Joined: Apr 2005
Posts: 2,481 Likes: 1
Member
|
|
Member
Joined: Apr 2005
Posts: 2,481 Likes: 1 |
In extension setup you need to confirm the voice ports for signaling type are set as DP and terminal type as special.
We get old too soon, smart too late
|
|
|
|
|
Joined: Sep 2004
Posts: 4,127 Likes: 1
Member
|
|
Member
Joined: Sep 2004
Posts: 4,127 Likes: 1 |
How are the calls getting to the Aspire S local dial tone or across the Aspirenet?
|
|
|
|
|
Joined: Jun 2004
Posts: 1,367
Member
|
|
Member
Joined: Jun 2004
Posts: 1,367 |
+1 on Dans response.
On a side note does anyone know the reason why DP? always seemed counter intuitive on that.
|
|
|
|
|
Joined: Aug 2005
Posts: 560
Member
|
|
OP
Member
Joined: Aug 2005
Posts: 560 |
I did check the setup of the extensions and they are indeed set for DP/Special. The Aspire S auto-configures that stuff. Outside lines are local analog trunks - Aspirenet is just used for site-to-site calling and tranferring outside calls between sites.
|
|
|
|
|
Joined: Oct 2004
Posts: 1,486
Member
|
|
Member
Joined: Oct 2004
Posts: 1,486 |
how about your DTMF resources. You need atleast 1 set for Common
|
|
|
|
|
Joined: Aug 2005
Posts: 560
Member
|
|
OP
Member
Joined: Aug 2005
Posts: 560 |
The Aspire S has 16 DTMF resources. They are all currently set for common. I assume that's the default, since I have not changed anything there.
|
|
|
|
|
Joined: Aug 2005
Posts: 560
Member
|
|
OP
Member
Joined: Aug 2005
Posts: 560 |
Here's some additional information. And, I know this is wrong - just not sure it should effect DTMF detection.
I left the Voice Mail pilot number as 700 (default) on both sites. I am thinking that changing it to 600 on the Aspire S side would be easy enough.......
Anyone think that's why the DTMF detection is not working?
|
|
|
|
Forums84
Topics93,826
Posts636,757
Members49,644
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
![[Linked Image from i26.servimg.com]](http://i26.servimg.com/u/f26/14/56/80/78/logo12.png){kind=logo}
