|
|
Joined: Oct 2002
Posts: 723
Member
|
OP
Member
Joined: Oct 2002
Posts: 723 |
Hey gang, Just thought I'd pass this along...you would figure it out on your own eventually but to save time. Had a TDA50 that after power cycling the phones would power on with "Incoming call xxx" on all LCD's and their msg lights would be on - system basically in "lock down" as well. Initialized and all would be fine until another power cycle test - found under Errors was Low Battery alert. Replaced battery and performed another initialization and all is well. The battery (which is the same used in the old TVS 100,200 etc and many other Panasonic telecom equip) is CR2354-1GUF. The "1GUF" denotes the connector pin layout for the PCB connection - solders into PCB. I couldn't get solder residue completely out and replacement leads are squared...so had to do "custom" wire leads (phone wire) to battery leads etc..
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
78
guests, and
293
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|