|
|
|
|
Joined: Mar 2016
Posts: 1
Member
|
OP
Member
Joined: Mar 2016
Posts: 1 |
I am looking for information on how to program SIP phones on an ECS. I have SIP station licenses on a version 12 ECS. I would like to try using a basic Grandstream SIP phone as an extension on the ECS. Looking for both ECS programming info as well as setup information of the Grandstream phone (GXP1100).
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,796 Likes: 10
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,796 Likes: 10 |
Do you have programmer/vendor access to the phone system data base? Most of the programming you need to do can't be done with a key set.
You'll need to create the virtual card for the extension then register the phone to the phone system using the LAN2 IP address. Your system already has the MBU card I'm guessing?
All SIP phones connect/program a little differently. so you'll have to try different settings on the phone.Usually, the main hang-ups are in transport. Choose UDP.
My best advice is to get your vendor involved. Your blood pressure will thank you later.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Forums84
Topics94,289
Posts638,795
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, justbill),
176
guests, and
395
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
