|
|
Joined: Mar 2016
Posts: 4
Member
|
OP
Member
Joined: Mar 2016
Posts: 4 |
Hello,
I have a older Inter-Tel axxess system that we have had for years and management doesn't want to replace yet. We are changing providers and the new provider would like to know if we require 4 or 10 digits.
I have looked in the DB programming and cannot find anything which specifically states how it is currently configured.
Our software version is 9.100
The original dealer is no longer available so I am hoping to be able to handle this transition myself. All numbers are being ported to the new provder so in theory no configuration changes should be necessary.
|
|
|
|
|
Joined: Oct 2009
Posts: 107
Member
|
|
Member
Joined: Oct 2009
Posts: 107 |
Navigate to System/Trunk-Related Information then Call Routing Tables. You may have 1 or 2 tables. The Pattern Fields are how many digits you are currently getting. Good Luck!
Inter-tel Axxess, Mitel CS/HX5000, MiVoice Office CCS/CSM, VPU, EM, ATM4, A+, CTP+, NET+, OAISYS, Audicodes, Polycom, Spectralink, NEC Red, Samsung, Mitel Call Recording, Mitel MBG, MiVoice Office, Xarios. Mitel Phone Manager
|
|
|
|
|
Joined: Mar 2016
Posts: 4
Member
|
|
OP
Member
Joined: Mar 2016
Posts: 4 |
the "Pattern" field shows 4 digits so I can assume 4 digit dialing then?
The description field has the full number
Thanks for the reply!
Last edited by thepita; 03/29/16 05:39 PM.
|
|
|
|
Forums84
Topics93,832
Posts636,788
Members49,649
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
216
guests, and
89
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
