Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#605765 11/24/16 09:22 AM
Joined: Nov 2016
Posts: 9
tom1234 Offline OP
Member
OP Offline
Member
Joined: Nov 2016
Posts: 9
Hello,
Could someone please help on this I am really dissapointed..how can I set a station group that is set to accept calls from 709 - 716 ( two isdn bri ) to send the correct clip outgoing number and not dial an outside line from other trunks and therefore send another clip?
I have set on 614 the stations to group 006 and trunk groups 709 - 716 to group 306, then on 304 I set 006 to use 306 but it is not keeping the configuration.. when I press mmc 304 again the station group 006 is using 301 (the default). is any other command that overrides this clip configuration. is any other setting where you use the 614 groups assignment?I have tried mmc 323, ( no success) I cannot send the correct clip..any help would be deeply appreciated.
Thank you

Atcom VoIP Demo
VoIP Demo
Joined: Jun 2006
Posts: 2,968
Likes: 3
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 2,968
Likes: 3
The ext-trunk tables are by default all set to yes.

You need to change your station group to dial no for the other trunk groups, and only have the trunk group you want them to use set to yes.

You will also need to make the other groups no for this trunk group.

Put all trunks in the 0 (or 9) trunk group.

You'll also need to make sure you program the cli against those phones, and set the bri lines to use the correct cli table


Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,832
Posts636,785
Members49,648
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
alphaTex, Brian Wall, demapples, Harry Tinsley, rookhsd11
Newest Members
devben, bubblegum, Carl Arnold, Marjan Shaw, KoolBreeze
49,648 Registered Users
Top Posters(30 Days)
ramo 13
Toner 11
pvj 11
dans 5
Who's Online Now
0 members (), 189 guests, and 54 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5