|
|
|
|
Joined: Nov 2016
Posts: 9
Member
|
OP
Member
Joined: Nov 2016
Posts: 9 |
Hello,
Could someone please help on this I am really dissapointed..how can I set a station group that is set to accept calls from 709 - 716 ( two isdn bri ) to send the correct clip outgoing number and not dial an outside line from other trunks and therefore send another clip?
I have set on 614 the stations to group 006 and trunk groups 709 - 716 to group 306, then on 304 I set 006 to use 306 but it is not keeping the configuration.. when I press mmc 304 again the station group 006 is using 301 (the default). is any other command that overrides this clip configuration. is any other setting where you use the 614 groups assignment?I have tried mmc 323, ( no success) I cannot send the correct clip..any help would be deeply appreciated.
Thank you
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
The ext-trunk tables are by default all set to yes.
You need to change your station group to dial no for the other trunk groups, and only have the trunk group you want them to use set to yes.
You will also need to make the other groups no for this trunk group.
Put all trunks in the 0 (or 9) trunk group.
You'll also need to make sure you program the cli against those phones, and set the bri lines to use the correct cli table
|
|
|
|
Forums84
Topics94,282
Posts638,763
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
129
guests, and
226
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
