Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#611326 07/18/17 11:19 PM
Joined: Apr 2009
Posts: 419
Gary S. Offline OP
Member
OP Offline
Member
Joined: Apr 2009
Posts: 419
The sts on my test bench, flash 30, buttons 9-10-11-12 do not bring up ran hunt groups 458-459-450-461.
They are in the sts book that i have,which is older than the ksu.???
Thanks Gary S.


Gary Stevens
Atcom VoIP Demo
VoIP Demo
Gary S. #611376 07/21/17 01:29 AM
Joined: Jan 2008
Posts: 3,821
Retired Moderator
****
Offline
Retired Moderator
****
Joined: Jan 2008
Posts: 3,821
They are not station hunt groups, just ran groups and so you can only use them when programming UCD (flash 62)
To program a Table for a RAN Hunt Group port:
1. Press the TABLE X flexible button (1-8).
2. Dial [3] for RAN Hunt Group.
3. Dial [0458-0461] for RAN Hunt Group used.
4. Enter message duration (000-300 seconds).
5. Press HOLD to save the entry. A confirmation tone sounds and the display updat


www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.
Derrick #611390 07/21/17 07:41 PM
Joined: Apr 2009
Posts: 419
Gary S. Offline OP
Member
OP Offline
Member
Joined: Apr 2009
Posts: 419
Derrick, thanks. Then i need to record the ran hunt gp in the flash V.M. (7) and set selector code,lets say 3, to 0458 for the outside caller to
here that recorded message (all staff are busy please hold) after they press 3.
Am i on the right track ?
Gary S.


Gary Stevens
Gary S. #611408 07/22/17 12:56 PM
Joined: Jan 2008
Posts: 3,821
Retired Moderator
****
Offline
Retired Moderator
****
Joined: Jan 2008
Posts: 3,821
It depends, are you sending the calls to a group of phones first and then hear the message if phones are all busy or do you want them to hear the message immediately after pressing 3? If right after pressing 3 then you might as well make a simple menu ( virtual extension forwarded to hunt group such as 451 or another hunt group with the vm extensions in it) with a recorded greeting which in essence fakes a ucd call.

If you are actually using UCD you need to follow the manual, its a bit too complicated to post all the steps here. I can get you started. You send the calls when pressing 3 to a ucd group like 550 which has group extension(s) assigned to it. You set a Ring Timer which determines how long before the first RAN plays. The UCD group is assigned a RAN table, the table has the RAN hunt number in it. You can add an overflow station between the first group and the RAN if you want, but it is not necessary.

Also a Ran announcement can also allow key strokes (menu) or not, this allows people to choose to stay in cue or leave a message, or other options.

Last edited by Derrick; 07/22/17 01:07 PM.

www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.
Derrick #611480 07/25/17 01:49 PM
Joined: Apr 2009
Posts: 419
Gary S. Offline OP
Member
OP Offline
Member
Joined: Apr 2009
Posts: 419
Thanks Derrick.
I assume that m.o.h. is also played when no ran message is heard ? This customer wants a lot from a $*** v.m.
Gary S.


Gary Stevens
Gary S. #611496 07/25/17 08:49 PM
Joined: Jan 2008
Posts: 3,821
Retired Moderator
****
Offline
Retired Moderator
****
Joined: Jan 2008
Posts: 3,821
If Ringback on transfer is enabled then the caller hears that until the system plays the first message or call is answered, if not enabled then music, but not from the voice mail, from a separate moh source.


www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.
Derrick #611523 07/26/17 07:03 PM
Joined: Apr 2009
Posts: 419
Gary S. Offline OP
Member
OP Offline
Member
Joined: Apr 2009
Posts: 419
Thanks again.


Gary Stevens

Moderated by  EV607797, JWRacedog, MnDave, nfcphoneman 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,833
Posts636,789
Members49,649
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
AWhite, jnimmick, MarkTPN
Newest Members
Lazlo, devben, bubblegum, Carl Arnold, Marjan Shaw
49,649 Registered Users
Top Posters(30 Days)
ramo 13
pvj 11
Toner 9
Who's Online Now
0 members (), 59 guests, and 20 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5