|
Joined: Apr 2009
Posts: 440
Member
|
OP
Member
Joined: Apr 2009
Posts: 440 |
The sts on my test bench, flash 30, buttons 9-10-11-12 do not bring up ran hunt groups 458-459-450-461. They are in the sts book that i have,which is older than the ksu.??? Thanks Gary S.
Gary Stevens
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
They are not station hunt groups, just ran groups and so you can only use them when programming UCD (flash 62) To program a Table for a RAN Hunt Group port: 1. Press the TABLE X flexible button (1-8). 2. Dial [3] for RAN Hunt Group. 3. Dial [0458-0461] for RAN Hunt Group used. 4. Enter message duration (000-300 seconds). 5. Press HOLD to save the entry. A confirmation tone sounds and the display updat
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Joined: Apr 2009
Posts: 440
Member
|
OP
Member
Joined: Apr 2009
Posts: 440 |
Derrick, thanks. Then i need to record the ran hunt gp in the flash V.M. (7) and set selector code,lets say 3, to 0458 for the outside caller to here that recorded message (all staff are busy please hold) after they press 3. Am i on the right track ? Gary S.
Gary Stevens
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
It depends, are you sending the calls to a group of phones first and then hear the message if phones are all busy or do you want them to hear the message immediately after pressing 3? If right after pressing 3 then you might as well make a simple menu ( virtual extension forwarded to hunt group such as 451 or another hunt group with the vm extensions in it) with a recorded greeting which in essence fakes a ucd call.
If you are actually using UCD you need to follow the manual, its a bit too complicated to post all the steps here. I can get you started. You send the calls when pressing 3 to a ucd group like 550 which has group extension(s) assigned to it. You set a Ring Timer which determines how long before the first RAN plays. The UCD group is assigned a RAN table, the table has the RAN hunt number in it. You can add an overflow station between the first group and the RAN if you want, but it is not necessary.
Also a Ran announcement can also allow key strokes (menu) or not, this allows people to choose to stay in cue or leave a message, or other options.
Last edited by Derrick; 07/22/17 09:07 AM.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Joined: Apr 2009
Posts: 440
Member
|
OP
Member
Joined: Apr 2009
Posts: 440 |
Thanks Derrick. I assume that m.o.h. is also played when no ran message is heard ? This customer wants a lot from a $*** v.m. Gary S.
Gary Stevens
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
If Ringback on transfer is enabled then the caller hears that until the system plays the first message or call is answered, if not enabled then music, but not from the voice mail, from a separate moh source.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Joined: Apr 2009
Posts: 440
Member
|
OP
Member
Joined: Apr 2009
Posts: 440 |
Gary Stevens
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|