|
|
|
|
Joined: Nov 2006
Posts: 186
Member
|
OP
Member
Joined: Nov 2006
Posts: 186 |
I need a little help on how to swap out 2 4x8 cards and install a 16 psub I need a spare slot for MBU card.
I was told to remove 4x8 cards and reboot and then install the new 16 port card.
do I have to remove the cards from program first.
jim
|
|
|
|
|
Joined: Aug 2006
Posts: 1,773 Likes: 7
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,773 Likes: 7 |
Remove the 408s in programming then reboot the ECS. Make sure it's all the way back up and verify in programming that the 408s are no longer installed. Set the make busy switch on the 16PSUB, slide it in the slot and let the switch find it and configure it then program the ports as needed. This is more an exercise in patience than anything else...
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Forums84
Topics93,877
Posts636,993
Members49,670
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (hitechcomm),
103
guests, and
16
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
